owners manual Subaru Outback

all ratings: 0 average rating: 5

Starting and operating7-9 6. Confirm that all warning and indicator4. Turn the ignition switch to the “ON”the accelerator pedal. lights have turned off after the engine hasposition and check the operation of the(4) If the engine still refuses to start, started. The fuel injection system auto-warning and indicator lights. Refer tocontact your nearest SUBARU dealer matically lowers the idle speed as the“Warning and indicator lights” F3-9.for assistance. engine warms up. 5. Turn the ignition switch to the “START”6. Confirm that all warning and indicator position without depressing the accelera-lights have turned off after the engine has NOTE(2.5 L non-turbo models)tor pedal. Release the key immediatelystarted. The fuel injection system auto- To protect the engine while the shiftafter the engine has started.matically lowers the idle speed as the lever is in the neutral position, theIf the engine does not start, perform theengine warms up. engine is controlled so that the enginefollowing procedure.While the engine is warming up, make speedmaynotbecometoohighevenif(1) Turn the ignition switch to thesure that the select lever is at the “P” or the accelerator pedal is depressed“LOCK” position and wait for at least“N” position and that the parking brake is hard. 10 seconds. After checking that theapplied. parking brake is applied, turn the &ATandCVTmodels ignition switch to the “START” positionNOTE(2.5Lnon-turboand3.6L while depressing the accelerator pedalmodels) CAUTION slightly (approximately a quarter of the full stroke). Release the acceleratorTo protect the engine while the select If you restart the engine while thepedal as soon as the engine starts.lever is in the “P” or “N” position, the vehicle is moving, shift the select(2) If this fails to start the engine, turnengine is controlled so that the engine lever into the “N” position. Do notthe ignition switch back to the “LOCK”speedmaynotbecometoohighevenif attempt to place the select lever of aposition and wait for at least 10the accelerator pedal is depressed moving vehicle into the “P” posi-seconds. Then fully depress the accel-hard. tion. erator pedal and turn the ignition switch to the “START” position. If the 1. Apply the parking brake. engine starts, quickly release the 2. Turn off unnecessary lights and ac-accelerator pedal. cessories. (3) If this fails to start the engine, turn 3. Shift the select lever to the “P” or “N”the ignition switch again to the “LOCK” position (preferably“P” position). Theposition. After waiting for 10 seconds starter will only operate when the selector longer, turn the ignition switch to the lever is at the “P” or “N” position.“START” position without depressing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders