owners manual Subaru Outback

owners manual Subaru Outback - year of production: 2009, 2010, 2011, 2012, 2013, 2014 - Subaru Outback Legacy IV 4 owners manual EN

Document: pdf (18.3 MB) 474 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Subaru Outback, year of production 2009 - 2014:

7-12 Starting and operating remote keyless entry transmitter will dis-Transmitter flash sequenceFeature description arm the alarm system. Refer to “Alarm system” F2-15. Flashes when button isIndicates that the system is transmitting an RF signal. 2. Enter the vehicle. pressed 3. The engine will shut down when anyTwo long flashes following re-Indicates that the transmitter did not receive the remote start door or trunk/rear gate is opened.mote start activation (transmit-activation confirmation from the vehicle system. The transmitter ter button is pressed two times will automatically send one additional remote start activation 4. Insert the key into the ignition switchwithin 3 seconds)attempt. This usually occurs when the operational range is at its and turn to the “START” position to restart limit or has been exceeded. the engine. One flash following remoteIndicates that the engine is running via remote start. If the start activation (transmittertransmitter is moved outside of the operating range of the &Remotestart confirmation button is pressed two timessystem, this sequence will timeout after the normal 15-minute within 3 seconds) vehicle run cycle. transmitter feature Indicates that the engine is running via remote start. If the Your remote engine start transmitter is2 flashes every 5 secondstransmitter is removed outside of the operating range of the equipped with a unique bidirectional con- system, this sequence will timeout after the normal 15-minute firmation feature. This feature will allow vehicle run cycle. the transmitter’s backlit button to display Indicates that the engine has turned off due to a remote start the status of the system under the condi-3 flashessystem 15-minute timeout, vehicle safety parameter or normal shutdown. tion that the vehicle and transmitter are within the operational range of the system. Typical transmitter button flash sequences are outlined in the following chart.

Download PDF

Click here to download a pdf file with an instruction manual for Subaru Outback
year of production from: 2009

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.