owners manual Subaru Outback

all ratings: 0 average rating: 5

Starting and operating7-19 In this position, the transmission is me-transmission is neutral; the vehicle will roll! D(Drive) chanically locked to prevent the vehiclefreely, even on the slightest incline unlessThis position is for normal driving. The from rolling freely. the parking brake or foot brake is applied.transmission automatically shifts into a Avoid coasting with the transmissionsuitable gear according to the vehicle Whenyoupark the vehicle, first apply theneutral. speed and the acceleration you require. parking brake, then shift into the“P” position. Do not hold the vehicle with onlyDuring coasting, there is no engine brak-Whenmoreacceleration is required in this the transmission. ing effect. position, depress the accelerator pedal NOTE fully to the floor and hold that position. The To shift the select lever from the “P” to any transmission will automatically downshift. other position, you should depress the. To protect the engine while the “N”Whenyoureleasethepedal,thetransmis- brake pedal fully then move the selectposition is selected, the engine is sion will return to the original gear posi- lever. This prevents the vehicle from controlled such that the engine speedtion. lurching when it is started. may not become too high even if theTo use the manual mode, move the lever NOTE accelerator pedal is depressed hard.from this position into the manual gate. . If the select lever is in the “N” To protect the engine while the “P”position when you stop the engine forNOTE(ATmodels only) position is selected, the engine isparking, you may not subsequently beAutomaticdownshiftsto4thor3rdmay controlled such that the engine speedable to move it to the “R” and “P”occur even when driving on a level may not become too high even if thepositions. If this happens, turn theroad depending on conditions, such as accelerator pedal is depressed hard.ignition switch to the “ON” position.howhardyoudepressthebrakepedal. ! R(Reverse) Youwill then be able to move the select lever to the “P” position. !While climbing a grade This position is for backing the vehicle. Whendrivingupahill, undesired upshift is To shift from the “N” to “R” position, stopWARNING prevented from taking place when the the vehicle completely then move the accelerator is released. This minimizes lever to the “R” position. Do not drive the vehicle with thethe chance of subsequent downshifting to select lever in the“N” (neutral)a lower gear when accelerating again. ! N(Neutral) position. Engine braking has noThis prevents repeated upshifting and This position is for restarting a stalledeffect in this condition and the riskdownshifting resulting in a smoother op- engine. of an accident is consequently in-eration of the vehicle. In this position the wheels and transmis-creased. sion are not locked. In this position, the – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders