owners manual Subaru Outback

owners manual Subaru Outback - year of production: 2009, 2010, 2011, 2012, 2013, 2014 - Subaru Outback Legacy IV 4 owners manual EN

Document: pdf (18.3 MB) 474 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Subaru Outback, year of production 2009 - 2014:

Starting and operating7-7 . A vehicle fails the OBDII inspection ifThe U.S. Environmental Protection Preparing to drive the “CHECK ENGINE” warning light is notAgency (EPA) and states using two-wheel properly operating (light is illuminated or isdynamometers in their emission testingYou should perform the following checks not working due to a burned out bulb) orprogram have EXEMPTED SUBARU and adjustments every day before you there is one or more diagnostic troubleAWD vehicles from the portion of thestart driving. codes stored in the vehicle’s computer.testing program that involves a two-wheel1. Check that all windows, mirrors, and . Astate emission inspection may rejectdynamometer. There are some states thatlights are clean and unobstructed. (not pass or fail) a vehicle if the number ofuse four-wheel dynamometers in their2. Check the appearance and condition OBDII system readiness monitors “NOTtesting program. When properly used, thisof the tires. Also check tires for proper READY” is greater than one. If theequipmentshouldnotdamageaSUBARUinflation. vehicle’s battery has been recently re-AWDvehicle. 3. Look under the vehicle for any sign of placed or disconnected, the OBDII systemUnder no circumstances should the rearleaks. inspection may indicate that the vehicle iswheels be jacked off the ground, nor4. Check that the hood, trunk (Legacy) not ready for the emission test. Under thisshould the driveshaft be disconnected forand rear gate (Outback) are fully closed. condition, the vehicle driver should bestate emission testing. instructed to drive his/her vehicle for a few 5. Check the adjustment of the seat. days to reset the readiness monitors and 6. Check the adjustment of the inside return for an emission re-inspection. and outside mirrors. . Owners of rejected or failing vehicles 7. Fasten your seatbelt. Check that your should contact their SUBARU Dealer for passengers have fastened their seatbelts. service. 8. Check the operation of the warning and indicator lights when the ignition Some states still use dynamometers in switch is turned to the “ON” position. their emission inspection program. A 9. Checkthegauges,indicator andwarn- dynamometer is a treadmill or roller-like ing lights after starting the engine. testing device that allows your vehicle’s wheels to turn while the vehicle remains in one place. Prior to your vehicle being put on a dynamometer, tell your emission inspector not to place your SUBARU AWD vehicle on a two-wheel dynam- ometer. Otherwise, serious transmis- sion damage will result. – CONTINUED –

Download PDF

Click here to download a pdf file with an instruction manual for Subaru Outback
year of production from: 2009

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.