owners manual Seat Arona

all ratings: 0 average rating: 5

Operation Connecting and activating the ACCIt will also switch to inactive mode (Standby)●Normal ehicle is stopped and the driver door if the v ●Sport o c and activate the ACC, the position T onnect is opened. of the gearbox selector lever, the vehicle ●Eco speed and the position of the third level of ●Convenience Adjusting the default distance level at the the ACC must all be taken into account. start of your journey. In this case, you should access the ACC set- ●With a manual gearbox, the gearbox selec- In wet road conditions, you should always set tings using the  button and the SETTINGS > tor lever must be in any gear except first, and a larger distance with regard to the vehicle in Driver assistance > ACC function buttons speed must be greater than approximately 30 front than when driving in dry conditions. ››› page 33.  km/h. With an automatic gearbox, the gear- The following distances can be preselected: box selector lever must be in position D or S. The following conditions may lead the ACC ●To activate the ACC, press the  button or ●Very short not to react: move the third lever of the ACC to position 2 ●Short ●If the accelerator is pressed. ››› Fig. 196. At this point, the image of the ●Media ●If there is no gear engaged. ACC on the instrument panel display will switch from Inactive (Standby) to Active mode● Long ● If the ESC is controlling. ››› Fig. 194. ●Very long ●If the driver is not wearing his/her seat belt. When the ACC function is active, the vehicle In the Easy Connect system you can adjust travels at a set speed and distance from the ● If several brake lights of the vehicle or elec- the distance level that will be applied when vehicle ahead. Both speed and distance can trically connected trailer are damaged. the ACC is connected using the  button be changed at any time. ET er a sistance● and the S TINGS and Drivs functionIf the vehicle is reversing. buttons ››› page 33.  ●Driving faster than 210 km/h (150 mph). Disconnecting and deactivating the ACC To disconnect the ACC move the lever to theChanging the driving profile WARNING 0 position ››› Fig. 196 (engaged). An ACC In vehicles with SEAT Drive Profile, the driving There is a danger of rear collision when the deactivated message appears and the profile selected can have an influence on the minimum dist ance to the vehicle in front is function is totally deactivated. ACC’s acceleration and braking behaviourexceeded and the speed difference between If you do not wish to disconnect the ACC, just››› page 225.both vehicles is so great that a speed reduc- tion by the ACC will not suffice. In this case to switch it temporarily to inactive mode In vehicles without SEAT Drive Profile, the be- the brake pedal should be applied immedi- (Standby), move the third lever to position 3 haviour of the ACC can also be affected by se- ately. ››› Fig. 196 or press the brake pedal. lecting any of the following drive profiles in the Easy Connect system: 214

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders