owners manual Alfa Romeo 33

owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN

Document: pdf (12.9 MB) 378 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:

ENGINE MAIN MECHANICAL UNIT 13. Fit crankshaft front pulleys. 0: Tightening torque (1) Key the below mentioned parts Screws securing water pump according to the indicated sequence: 19 +24 Nam the belt guide washer@, the left (I .9 + 2.4 kg-m head camshaft drive toothed pul- 13.7 + 17.4 ft.lb) ley 0, the spacer@, the right head camshaft drive toothed pul- ley 0, the water pump and alterna- tor drive pulley@, the spacer 0, and the washer0. 10. Fit front cover, with proper gasket, to cylinder blockand tighten screws and nuts according to speci- fied torque. 0: Tightening torque 1 Nut 5 Toothed pulley 6 Spacer 1 Gasket Front cover to cylinder block2 Washer 3 Screw retaining screws: 3 Spacer 7 Toothed pulley 2 Pump 19 + 24 N-m 4 Pulley 8 Washer (1.9 + 2.4 kg-m 15. Fit cylinder heads. 13.7 + 17.4 ft.lb) (I) Turn crankshaft till the piston in (2) After having suitably locked No. 1 cylinder is set at Top Dead flywheel rotation, tighten pulley 11. Fit the engine front support@ Center in the compression stroke; retaining nut according to specified and the pulley’s lower guard@ to this correct positioning is further the cover. torque. ensured by the‘7” notch0 on the Tightening torque flywheel matching with the refer- ence 20 onThe rear cover0. Pulleys to cylinder block re- taining nut: 118 + 144 N-m (12 + 14.7 kg-m 86.8 + 106.3 ft.lb) 1 Pulley’s guard2 Front support 12. Fit crankshaft oil seal front ring using tool A.3.8338. Before doing so, apply a coating of engine oil to the ring’s sealing lip and work surface. 14. Fit the water pump. 1 Notch 3 Cylinder block (1) Fit new gasket@ on pump. 2 Reference rear cover (2) Fit pump0, without pulley, on cylinder block. (2) Align the references shown on (3) Fit screws@ with washers and the camshaft rear journal and on the tighten them to specified torque value. support rear side panel. May 1983 01-28

Download PDF

Click here to download a pdf file with an instruction manual for Alfa Romeo 33
year of production from: 1983

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.