owners manual Alfa Romeo 33

owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN

Document: pdf (12.9 MB) 378 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:

ENGINE MAIN MECHANICAL UNIT successive steps, according to speci- 4. Fit seal ring in the main oil block having the gauge’s indicating gallery of the cylinder block rear fied torque and sequence (from A finger touch the crankshaftparallel- to F). wise to the shaft’s axis. cover. (2) Using a screwdriver, move the 0: Tightening torque crankshaft along its axis and check Caps to cylinder supports se- the gauge’s reading to ensure that curing screws: “g” end play is within specified 66 + 73N- m values. (6.7 + 7.4kg- m 46.4 + 53.5ft-lb) Crankshaft end play 0.35 mm (0.0137 in) 5. Fit rear cover, with relevant the cylinder block. gasket, on (4) Subsequentially tighten screws Tighten all cover retaining screws securing the main bearing caps to the according to specified torque. cylinder block in two or three successive steps, according to speci- @ : Tightening torque fied torque and sequence (from A Rear cover retaining screws to F). 19+24N-m (1.9 + 2.4kg- m 0: Tightening torque 13.7 + 17.4 ft.lb) (3) If the shaft has not been pre- Caps to cylinder blocksup- ports securing screws viously reground and therefore the 40+49 N-m value established as per step above is (4.1 + 5 kgam greater than the specified value, it is 29.6 + 36.2ft.lb) possible to regrind the shoulders of the rear journal till its “c” iength is such that it willallow fitting of the oversize thrust half-rings available as spare parts. Having completed tightening of all screws, apply engine oil the ‘to supports and rotate the crankshaft by hand. 6. Fit crankshaft oil seal ring using tool A-3.0337. Rear journal“c” length a. Apply engine oilto the ring’s 3. Check crankshaft end play. 28.764 + 28.804mm . sealing lip, its external surface as (1) Attach a centesimal dial gauge (1.1324 + 1.1340 in) well as to its working seat. with magnetic base to the cylinder May 1983 01-26

Download PDF

Click here to download a pdf file with an instruction manual for Alfa Romeo 33
year of production from: 1983

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.