owners manual Skoda Kodiaq

all ratings: 0 average rating: 5

Do not use the puncture repair kit in the following instances.ě Ėė volt cable connector ▶ 0he rim is damaged. Ĝ 0yre inflation hose ▶ 0he outdoor temperature is below the minimum temperature indicated in ĝ 0yre inflation pressure indicator the instruction manual of the tyre filling bottle with sealant. Ğ ON and OFF switch ▶ 0yre punctures of more than ę mm. Ėĕ 0yre inflation bottle with sealing agent ▶ 0here is damage to the tyre wall. ▶ ĖĖ Replacement valve core 0he expiration date (see inflation bottle) has passed. Note 3ARNING 0he declaration of conformity is included with the air compressor or the log ■ If the sealant comes into contact with skin, wash the affected area imme- folder. diately. ■ Observe the manufacturer's usage instructions for the breakdown kit. Preparing to use the puncture repair kit Description of puncture repair kit Read and observe on page ėĞě first. For safety's sake, the following instructions must be observed before performing a wheel repair the road. ›As far as possible, park the vehicle far away from the traffic flow - find a place with a flat and firm surface. ›Switch off the engine. ›For vehicles with manual transmission, select Ėst gear. ›For vehicles with automatic transmission, place the selector lever in the P position. ›Switch on the parking brake. ›Position the hazard warning system and the warning triangle at the prescri- bed distance. ›All the occupants should get out of the vehicle. 0he passengers should not stand on the road (instead they should remain behind a crash barrier, for in- stance) while the wheel is being repaired. Fig. ĘęĞ Description of puncture repair kit ›1ncouple any trailers. Read and observe on page ėĞě first. Sealing and inflating tyres 0he kit is located in a box under the floor covering in the luggage compart- Read and observe on page ėĞě first. ment. Ė Sticker with speed designation “max. ĝĕ km/h”/“max. Ěĕ mph”Sealing ›1nscrew the valve cap from the damaged tyre. ė 2alve remover ›Insert the valve remover ė » Fig. ĘęĞ on page ėĞě on the valve insert, so Ę Inflation hose with plug that the valve insert fits into the slot of the valve remover. ę Air compressor (the layout of the controls may be different depending on ›1nscrew the valve insert and lay it on a clean surface (e.g. cloth, paper etc.). the type of air compressor delivered with the vehicle)  Forcefully shake bottle Ėĕ several times. › Ě Button for the tyre pressure reduction ėĞě Do-it-yourself

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders