owners manual Skoda Kodiaq

all ratings: 0 average rating: 5

›Restore the original position of the third seat row (applies to the seven-seat›0ighten the locking screw in the opposite direction of arrow ę until it stops version). » Fig. ĘęĘ. ›Insert the connector in the bass loudspeaker. CA10ION ›Secure the latch A in the opposite direction to arrow Ė . ■ 3hen handling the wheel, do not put this down on the lining parts in the ›Fold back the floor covering or insert the variable loading floor and fold back area next to the wheel, otherwise there is a risk of damaging these parts. the floor covering. ■ Before lowering the seats, unlock the lock tongues of the seat belts (the ›Restore the original position of the third seat row (applies to the seven-seat straps must be completely rolled up behind the lining of the rear body pillar) - version). otherwise there is a risk of damage to the locks, lock tongues as well as the CA10ION seats. Before lowering the seats, unlock the lock tongues of the seat belts (the straps must be completely rolled up behind the lining of the rear body pillar) - Removing/stowing wheel in vehicles with sound system otherwise there is a risk of damage to the locks, lock tongues as well as the seats. Fig. ĘęĘ 0ake out the wheel Full wheel trim Removing the trim ›0he clamps for removing the full wheel trims hang on the edge of the full wheel trim. ›Push the wheel wrench through the clamp, support on the tyre and pull off the wheel trim. Installing the trim 0he spare wheel is located in a well under the floor covering in the luggage ›Press the wheel trim onto the wheel rim at the designated valve opening. compartment and is fixed in place with a fastening screw. ›0hen press the trim into the wheel rim until its entire circumference locks 0ake out the wheel correctly in place. ›Fold down the backrests of the third seat row (applies to the seven-seat ver- 0he back of the wheel trim supplied by the factory or from the ŠKODA Original sion) » , Accessories shows the position for the anti-theft wheel bolt. 3hen using the ›Lift the floor covering and fold upward the variable loading floor and flooring anti-theft wheel bolt, this is to be fitted in this point » . covering. ›At the same time, pull the two release loops of the third seat row and lift the 3ARNING seats (applies to the seven-seat version). 3e recommend that you use hub caps from ŠKODA Original Accessories. A ›Press the latch A on the holder in the direction of the arrow Ė » Fig. ĘęĘ. sufficient air supply may not be able to be guaranteed with other wheel ›Press the latch in the direction of arrow ė and pull out the holder in the di- trims to cool the braking system - there is a risk of an accident. rection of arrow Ę . ›1nscrew the lock nut in the direction of arrow ę . CA10ION ›Remove the bass loudspeaker. ■ If the wheel trim is set outside the position marked for the anti-theft wheel ›Remove the wheel. bolt, there is a risk of damaging the wheel trim. Store wheel away ■ 1se only manual pressure and do not hit the full wheel trim – there is a risk ›Place the wheel into the wheel well with the wheel rim pointing downward.  of damaging the trim. ›Insert the bass loudspeaker. Emergency equipment and self-help ėĞĘ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders