Mitsubishi Eclipse II technical information manual page 298

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Eclipse, year of production 1995 - 1999:

BODY - Keyless Entry System 4-17 Transmission Code Transmission switch The illustration at left shows a code transmitted from the trans- mitter. When the switch is operated once, three data codes 2, - following the cyclic code are sent. One data code comprises Transmission code a total of 51 bits, of which 21 bits are used to constitute a secret code for identification of the user, and the remaining 25 bits are used for system identification, etc. The secret code for user identification is a combination of “OS” and “1s”. More Data code than a million combinations are available. ir” uvu /l Cyclic code 18CO571 RECEIVER the code stored in the EEPROM in the receiver The receiver is mounted at the driver’s side rear will be out of agreement. To allow operation of the quarter panel. The receiver has a code registration system, the code sent from the transmitter must switch by which the receiver is switched between coincide with the code stored in the receiver. For the system operation mode and code registration mode. this purpose, place the receiver in the registration mode and write (transmit) the secret code assigned Normal keyless entry system operations are per- formed in the system operation mode. In the systemto the transmitter in the EEPROM in the receiver operation mode, the signals transmitted from theas a new code. transmitter are compared with the code stored inThe EEPROM can store two codes. Since the user the EEPROM in the receiver. Only when the resultshas only one transmitter at first, the EEPROM stores are in agreement, a signal is output to the ETACS-two identical codes at shipment. When the user wants to use one more transmitter, a maximum ECU to lock or unlock the doors and cause the of two transmitters can be used by repeating the dome light to flash (when the doors are locked) or steadily light (when the doors are unlocked). (Theregistration operation to the EEPROM. (EEPROM: Electrical Erasable& Programmable idome light switch, however, must be in the “DOOR” position.) ROM which allows data to be electrically erased When the transmitter or receiver is replaced, noteand rewritten) that the secret code unique to the transmitter and (L.H.) Code registration switch 18X0704

owners manual Mitsubishi Eclipse

owners manual Mitsubishi Eclipse - year of production: 1995, 1996, 1997, 1998, 1999 - Mitsubishi Eclipse II technical information manual EN