język polski english language Deutsch español français

or

owners manual Mitsubishi Eclipse

owners manual Mitsubishi Eclipse - year of production: 1995, 1996, 1997, 1998, 1999 - Mitsubishi Eclipse II technical information manual EN

Document: pdf (13.48 MB) 381 pages
all ratings: 0 average rating: 5
text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Eclipse, year of production 1995 - 1999:
DRIVE-CONTROL COMPONENTS - ABS 3-38 INITIAL CHECK FUNCTION If it detects an error, it illuminates the warning light, The ECU always performs an initial check on the and disables the ABS system. ABS system with the on-board diagnostic function. 1. Initial Check Operation (1) When the ignition key is placed in the ON posi-the ABS valve relay is caused to be “OFF”, the warning light is kept in the ON state by tion, the power is supplied to the ABS-ECU, the ground contact circuit of the ABS valve relay. and the ABS-ECU starts a diagnostic sequence. (5) If the engine starts and the ignition key is re- During the diagnostic period, the ABS valve turned to the “ON” position, the ABS-ECU power relay stays in the “OFF” state and the warning light continues to light. supply is resumed, and initial checks in (1) through (3) are performed again. (2) Then, the ABS-ECU forces the ABS valve relay (6) When the initial checks are satisfactorily com- into the “ON” state and executes diagnostic test pleted, the ABS becomes ready for operation. mode of the ABS valve relay to detect an ON The warning light goes out upon detection of or OFF failure. a high voltage at the generator terminal L. (3) All the solenoid valves are caused to be ON and OFF to make sure that the valves are not NOTE sticking. An operation check for the motor relay and the motor (4) With the ignition key placed in the “START” is performed when the vehicle is put in motion after position and engine started, the voltage at the starting the engine. This check is performed only generator terminal L rises. At the moment, the ABS-ECU power supply is cut off, but since one whenever the ignition switch is turned “ON”. ,(‘)I (2) ,(3) -4 Ignition key START ON .:. ACC ., ABS-ECU 12v ,. power supply . . ov Generator High terminal LEi Or more) : : :i (Less than 6 V) .: ABS warning ON ----- light ‘. OFF ‘. ,‘.j ‘.’ ABS valve ON . . . . . . ,, relay . : ‘ ,‘.’ .,:: OFF I I ‘,. :: .: ,.,., .: : Solenoid ON valve OFF 14X0242
PDF Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Eclipse
year of production from: 1995



cars manual pdfDo you prefer pdf format?
Find out how to download
Enter the code to download PDF file:



All pages in one PDF file!

How to get the code?

It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.


:

secure paypal
How many PDF files you want to download:



Mitsubishi Eclipse II technical information manual
pages 256 - 262
256
Mitsubishi-Eclipse-II-technical-information-manual page 256 min
257
Mitsubishi-Eclipse-II-technical-information-manual page 257 min
258
Mitsubishi-Eclipse-II-technical-information-manual page 258 min
259
Mitsubishi-Eclipse-II-technical-information-manual page 259 min
260
Mitsubishi-Eclipse-II-technical-information-manual page 260 min
261
Mitsubishi-Eclipse-II-technical-information-manual page 261 min
262
Mitsubishi-Eclipse-II-technical-information-manual page 262 min

Mitsubishi Eclipse II technical information manual
page 259 / 381

first page -10 pages prev page next page +10 pages last page
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Mitsubishi Eclipse II technical information manual / page 259
first page -10 pages prev page next page +10 pages last page


PDF Download PDF