owners manual Mitsubishi Eclipse

owners manual Mitsubishi Eclipse - year of production: 1995, 1996, 1997, 1998, 1999 - Mitsubishi Eclipse II technical information manual EN

Document: pdf (13.48 MB) 381 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Eclipse, year of production 1995 - 1999:

3-36 DRIVE-CONTROL COMPONENTS- ABS EXPLANATION OF ECU CONTROL Braking Hydraulic Pressure Control The figure below shows the relation between the hydraulic pressure is increased to normal master wheel speed, wheel acceleration, control signal from cylinder pressure. Furthermore, in order to prevent the ECU and braking hydraulic pressure. a sudden increase in hydraulic pressure at this time, The ECU uses the signal from each wheel speed a pulse step control is performed to repeat the signal sensor to calculate wheel speed and wheel accelera- tion, calculates suspected vehicle speed from theseto increase pressure and the signal to hold pressure. By repeating this cycle and controlling the output and monitors the slipping of the wheels. If it seems braking hydraulic pressure, the wheel is kept in a the wheels are about to lock during sudden braking,narrow slipping ratio to assure the ideal braking a signal to reduce pressure or a signal to hold pres-force. This hydraulic pressure control is applied inde- sure is sent to control wheel locking. On the otherpendently to the left front wheel, right front wheel hand, if the danger of the wheel locking disappears, and both rear wheels. a signal to increase pressure is sent and the braking Actual vehicle speed --\-- Wheel speed -. e-N --- / ‘\ ----- --‘*;-.+;y:;;~; speed \ Slip ratio set value .-------- j+-fy- ----- -- Wheel acceleration ‘\\\--\ / \ / -------_ -- ----+.+-- \$/I Pressure reduction _-----__- 4*---t- -------~ ____ Signal pressure hole Pressure increase control Brake hydraulic pressure Time 4-wheel Control The ABS for FWD is a 4-sensor/3channel methodwheels and select-low control of the rear wheels. for independent control of the right and left front Control Speed Brake pressure is controlled at a vehicle speed ofhicle speed falls below approximately 3 km/h (2 mph), control ends. approximately 8 km/h (5 mph) or higher. Whenve-

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Eclipse
year of production from: 1995

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.