Mitsubishi Outlander PHEV III 3 owners manual page 229

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 66 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Reversing sensor system* Back sensor (vehicles without a towbar) NOTE NOTE Vehicle to obstacle Warning dis- zWhen the sensors are detecting different zThe detection area will not change if you distance play/sound cycle obstacles at the same time, the information keep the “SONAR” switch pushed for 10 Approx. 150 to 80 Intermittent screen in the multi information display indi- seconds or more. cm cates the directions of the obstacles each sen-zAfter pushing the “SONAR” switch, revers- Approx. 80 to 40 cm Fast intermittent sors are detecting. However, closer obstacles ing sensor system operation differs accord- are given priority over other detected obsta- ing to the detection area setting. Within approx. 40 Continuous cles and the warning buzzer sounds to inform •Setting when towbar is not equipped cm you of closer obstacles. When the selector lever is moved to the “R” position, the reversing sensor system will Back sensor (vehicles with a towbar) operate even if corner sensor operation was 7 Vehicle to obstacle Warning dis- Changing the detection areas stopped by pushing the “SONAR” switch. distance play/sound cycle E00615801257 •Setting when towbar is equipped The detection areas can be changed as fol- When reversing sensor system operation Approx. 150 to 100 Intermittent lows: was stopped by pushing the “SONAR” cm switch, the reversing sensor system will not Approx. 100 to 60 Vehicles with a towbar operate until the Plug-in Hybrid EV System cm Fast intermittent has been stopped even if the selector lever While the operation of the system is stopped is moved to the “R” position. Within approx. 60 at the “SONAR” switch, push the “SONAR” To resume reversing sensor system opera- cm Continuous switch approximately 3 seconds or more, and tion, push the “SONAR” switch or stop and release it. The buzzer sounds twice to indicate restart the Plug-in Hybrid EV System, and that the detection area has been changed. then move the selector lever to the “R” CAUTION position. zThe distances given are to be used for refer- Vehicles without a towbar ence only, as errors may be caused by vari- Reversing sensor system warn- ous factors, such as temperature, humidity, While the operation of the system is stopped or the shape of the obstacles. at the “SONAR” switch, push the “SONAR” ing display switch approximately 3 seconds or more, and E00615900323 release it. The buzzer sounds once to indicate In case there is a malfunction in the reversing that the detection area has been changed. sensor system, the display for the malfunc- tioning sensor will blink and the warning buzzer will sound for approximately 5 sec- 7-66 Starting and driving

owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN