owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 226 Friday, April 9, 2010 2:24 PM 226 Breakdown assistance – Have the tightening torque of the wheel bolts checked with a torque wrench as Caution soon as possible. Steel and light alloy wheels must be tightened to a tightening  Use the pressure of your hand, do not knock on the full wheel trim! Heavy knocks torque of 120 Nm. – Change the damaged wheel or consult a specialist garage about possibilities for mainly on the points where the full wheel trim has not been inserted into the wheel, getting repairs done. can result in damage to the guide and centering elements of the full wheel trim.  Check for yourself that the safety wheel bolt is located in the hole in the area of the valve before fitting the full wheel trim onto a steel wheel which is attached with a safety WARNING wheel bolt page228. It is necessary to observe the guidelines given on page218 if the vehicle is subsequently fitted with tyres which are different to those it was fitted with at Wheel bolts with caps* the works. Note  If you find, when changing the wheel, that the wheel bolts are corroded and diffi- cult to turn, the bolts must be replaced before checking the tightening torque.  Drive cautiously and only at a moderate speed to a workshop where the tightening torque can be checked. Full wheel trim* Fig. 176 Removing the cap. Pulling off Pulling off – Hook the clamp found in the vehicle tool kit into the reinforced edge of the full – Push the plastic clip sufficiently far onto the cap until the inner catches of the clip wheel trim. are positioned at the collar of the cap and detach the cap. – Push the wheel key through the clamp, support the wheel key at the tyre and pull off the wheel trim. Installing Installing – Push the caps fully onto the wheel bolts. – First press the full wheel trim onto the wheel at the valve opening provided. Then The caps are located in the well of the luggage compartment. press the full wheel trim into the wheel in such a way that its entire circumference locks correctly in place.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders