owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 229 Friday, April 9, 2010 2:24 PM Breakdown assistance 229 Both batteries must have a rated voltage of 12 V. The capacity (Ah) of the battery Start engine supplying the power must not be significantly less than the capacity of the discharged battery in your vehicle. Jump-start cables Only use jump-start cables which have an adequately large cross-section and insu- lated terminal clamps. Please pay attention to the manufacturer's instructions. Positive cable - colour coding in the majority of cases red. Negative cable - colour coding in the majority of cases black. Fig. 181 Jump-starting using the battery from another vehicle: A - flat vehicle battery, B - battery providing current WARNING  A discharged battery may already freeze at temperatures just below 0°C. In It is important to connect the jump-start cables in the correct order. case of frozen battery carry out no jump-starting - risk of explosion!  Please pay attention to the warning instructions relating to working in the Connecting positive terminals engine compartment page204, “Working in the engine compartment”. – Attach one end A 1 to the positive terminal  fig. 181 of the discharged battery A A . Note – Attach the other end A 2 to the positive te rminal of the battery supplying the power  There must not be any contact between the two vehicles otherwise current may A B . flow as soon as the negative terminals are connected. Connecting negative terminal and engine block  The discharged battery must be properly connected to the system of the vehicle. 3 B  Switch off any mobile phone, pay attention to the instructions for use of the mobile – Attach one end A to the negative termin al of the battery supplying the power A . phone in such a situation. – Attach the other end A 4 to a solid metal part which is connected firmly to the  We recommend that you purchase the jump-starting cable in the specialist shops engine block, or to the engine block itself. of the battery manufacturers. Starting the engine – Start the engine of the vehicle providing current and run the engine at idling speed. – Now start the engine of the vehicle with the discharged battery. – Interrupt the attempt at starting an engine after 10 seconds if it does not start right away and wait for about 30 seconds before repeating the attempt. – Disconnect the cables on the engine in exactly the reverse order they were connected up. Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders