owners manual Seat Ateca

all ratings: 0 average rating: 5

Operation function attempts to maintain the speed atUse the inertia mode to “let the vehicle roll” ● Make sure that the ESC remains switched which the vehicle was travelling when thebefore, for example, arriving in a town. on. Please note that when the ASR and ESC foot brake was applied (subject to the laws of are deactivated, the wheels may start to spin, causing the vehicle to lose grip. Risk of acci-physics and technical drive limitations). ItSwitching on inertia mode dent! may be necessary to adjust the speed again Important: selector lever must be in position using the foot brake in certain situations. Giv- ● After putting the vehicle into gear, the D, gradients below 12 %. en that the downhill speed control can only “sport” mode of the ESC should be deactiva- – Select, in SEAT Drive Profile*, Eco mode ted again by briefly pressing the OFF but-change down to 3rd gear, on very steep de- ton. scents the tiptronic mode may be required. In››› page 225. this case, manually reduce the tiptronic to – Take your foot off the accelerator. 2nd or 1st gear to use the engine brake and Note reduce the charge on the brakes.The driver message Inertia will be dis- ● Af er using the Launch control programme, t played. At speeds higher than 20 km/h (12 Downhill speed control is deactivated as the temperature in the gearbox may have in- mph), the gearbox will automatically disen- soon as the road levels out again or you creased considerably. In this case, the pro- gage and the vehicle will roll freely, without gramme could be disabled for several mi-press the accelerator pedal. the effect of the engine brake. While the vehi- nutes. The programme can be used again af- On vehicles with cruise control system*cle rolls, the engine runs at idling speed. ter the cooling phase. ››› page 193, downhill speed control is acti- ● Accelerating with the Launch control pro- vated when you set a cruising speed.Stopping inertia mode gramme places a heavy load on all parts of – Press the brake or the accelerator pedal. the vehicle. This can result in increased wear WARNING and tear. To make use of the braking force and switch The downhill speed control cannot defy the off the engine again, simply press the brake laws of physics. Therefore, speed cannot be pedal briefly. maintained constant in all situations. Always Downhill speed control* be prepared to use the brakes! Applying both the inertia mode (= prolonged section with less energy) and the switching The downhill speed control function helps off using inertia (= shorter section without the driver when driving down steep gradi- Inertia mode the need for fuel) facilitates improved fuel ents. consumption and emission balance. Downhill speed control is activated when the The inertia mode enables the kinetic energy selector lever is in D/S and the driver applies the vehicle to be harnessed enabling cer- of the foot brake. The automatic gearbox auto- tain stretches to be driven without using the matically engages a lower gear that is suita- accelerator. This enables fuel to be saved. ble for the slope. The downhill speed control 182

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders