owners manual Seat Ateca

all ratings: 0 average rating: 5

Operation When accelerating, the gearbox automatical-Stopping brieflyDriving down hills: in some situations (on shifts up into the next gear shortly before mountain roads or when towing a trailer or ly – Apply the foot brake to hold the vehicle the maximum engine speed is reached. caravan) it can be advantageous to switch briefly when stationary (for instance at traf- temporarily to the manual gearbox pro- fic lights). Do not press the accelerator. If you select a lower gear, the automatic gear- gramme so that the gear ratios can be selec- box will not shift down until there is no risk of ted manually to suit the driving conditions over-revving the engine. Stopping/Parking ››› . If the driver door is opened and the selector When the kick-down feature is used, the On level ground it is sufficient to move the lever is not in position P, the vehicle could gearbox shifts down to a lower gear, depend- selector lever to position P. On slopes, first move. The driver message will be:  Gear ing on road speed and engine speed. engage the parking brake and then put the change: selector lever in the selection lever into the P position. This drive position!. Additionally, a buzzer avoids overloading the locking mechanism will sound. Driving tips and it will be easier to move the selector lev- – Press and hold the brake pedal ››› . er from position P. The gearbox changes gear ratios automatical- – Apply the handbrake. ly as the vehicle moves. WARNING – Move the selector lever to position P. The engine can only start with the selector Observe the safety warnings ››› in Selector lever in position P or N. At low temperatures, lev er positions on page 177. Holding the car on a hill below -10°C (50°F), the engine can only start ● Never allow the brake to rub and do not use with the selector lever in position P.– Always apply the brake pedal firmly to pre- the brake pedal too often or for long periods. vent the vehicle from “moving backwards; Constant braking causes overheating in the Starting the vehicle if necessary, apply the handbrake” ››› . brakes. This could significantly reduce brak- Do not try to stop the vehicle “rolling back”ing power, increase braking distance or even – Press and hold the brake pedal. by increasing the engine speed when aresult in the total failure of the brake system. – Press and hold the interlock button (the gear is engaged (pressing the accelerator) ● To avoid rolling back on gradients always button on the selector lever handle), move ››› . hold the vehicle with the footbrake or hand- the selector lever to the desired position, brake if you have to stop. for instance D ››› page 177, and release the Starting off uphill interlock button. – Apply the handbrake. CAUTION – Wait for the gearbox to engage the gear (a ● If you stop the vehicle on a gradient, do not – Once you have engaged a gear press the slight movement can be felt). attempt to stop it from rolling by depressing accelerator carefully and disengage the – the accelerator when a gear has been selec- Release the brake and press the accelerator handbrake. ted. This could cause overheating and ››› . 180

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders