owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 169 Friday, April 9, 2010 2:24 PM Intelligent Technology 169 WARNING when the warning light lights up while driving, a basic setting of the system must be carried out as follows. Contact your specialist garage if the power steering is defective. Inflate all tyres to the specified inflation pressure  page 216.  Switch on the ignition. Tyre pressure monitoring system*    Press button fig.148 for more than 2 seconds. While pressing the button, the warning light  lights up. At the same time the memory of the system is erased and the new calibration is started, which is confirmed with an audible signal and then the warning light  goes out.  If the warning light  does not go out after the basic setting, there is a fault in the system. Have the vehicle inspected by your nearest specialist garage. Warning light  lights up If the tyre inflation pressure of at least one wheel is insufficiently inflated in comparison Fig. 148 Button for setting the tyre infla-to the stored basic value, the warning light   lights up. tion pressure control value Warning light  flashes The tyre pressure monitoring system compares with the aid of the ABS sensors the If the warning light flashes, there is a system fault. Have the vehicle inspected by your speed and also the rolling circumference of the individual wheels. If the rolling circum-nearest specialist garage. ference of a wheel is changed, the warning light  lights up in the instrument cluster page34 and an audible signal sounds. The rolling circumference of the tyre can WARNING change if:  When the warning light  lights up, immediately reduce the speed and  the tyre inflation pressure is too low, avoid sudden steering and brake manoeuvres. Please stop the vehicle without  the structure of the tyre is damaged, delay at the nearest possible stop and in spect the tyres and their inflation pres-  the vehicle is loaded on one side, sures.  the wheels of an axle are loaded heavily (e.g. when towing a trailer or when driving  The driver is responsible for the correct tyre inflation pressures. For this uphill or downhill), reason, the tyre inflation pressures must be checked regularly.  snow chains are mounted,  Under certain circumstances (e.g. sporty style of driving, wintry or unpaved  the temporary spare wheel is mounted, roads) the warning light  can be delayed or does not light up at all.  one wheel per axle was changed.  The tyre pressure monitoring system does not take away the responsibility from the driver for the correct tyre inflation pressure. Basic setting of the system After changing the tyre inflation pressures, after changing one or several wheels, the Note position of a wheel on the vehicle (e.g. exchanging the wheels between the axles) or The tyre pressure monitoring system: Using the system Safety Driving Tips General MaintenanceBreakdown assistanceTechnical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders