owners manual Mitsubishi Eclipse

owners manual Mitsubishi Eclipse - year of production: 1995, 1996, 1997, 1998, 1999 - Mitsubishi Eclipse II technical information manual EN

Document: pdf (13.48 MB) 381 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Eclipse, year of production 1995 - 1999:

POWER TRAIN - Automatic Transaxle Pump Reaction shafi Hydraulic Control System housing support + ;;rpump I OIL PUMP The oil pump is located in the pump housing inside the bell housing of the transaxle case. TheF4ACl uses a crescent type gear pump. The inner gear is driven by the torque converter hub. Torque is supplied to the hub by the engine crankshaft through the flex plate and torque converter housing. As the gears rotate, the clearance between the gear teeth increases in the crescent area and creates a suction at the Seal rings (4) inlet side of the pump. Fluid is pulled through the pump inlet from the oil pan. As the clearance between the gear teeth in the crescent area decreases, it forces fluid into the pump outlet. The pressurized oil from the outlet operates the torque converter, clutches, and the lubrication system. The pump is held in the housing by the reaction shaft support. The reaction shaft is splined to and holds the inner race of the torque convert- er stator’s overrunning clutch. VALVE BODY AND SOLENOID ASSEMBLY The valve body and solenoid assembly work togeth-pump. The pump pressurizes the fluid and sends er to control five transaxle clutches and the torque it back through the valve body to the regulator valve. converter clutch. It also directs pressurized fluid for lubrication. The oil pump is the source of pressur-The valve body uses only five valves along with four solenoids in the solenoid assembly. Theyper- ized fluid for the valve body and solenoid assembly. form all functions needed to operate the transaxle The pump is a positive displacement, gear and cres-for each of its gear ranges. A brief description on cent type pump. It is driven by the engine throughthe operation of each valve and solenoid follows. the torque converter hub. Fluid for the pump is drawn through the transaxle filter, through the valve body housing, and into the

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Eclipse
year of production from: 1995

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.