owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 164 Friday, April 9, 2010 2:24 PM 164 Intelligent Technology WARNING (continued) The EDL switches on again automatically as soon as the brake has cooled down. offered must not tempt you to take greater risks than otherwise - risk of an acci-EDL Off-road* dent! After switching on the Off-road mode page170, EDL Off-road is activated. EDL Off-road is matched in such a way that it assists the traction of the vehicle when Note driving on an unfirm ground.  All four wheels must be fitted with the same tyres in order to achieve problem-free EDL is activated earlier in the Off-road mode than in the normal mode. The brake pres- operation of the ESP. Differing rolling circum ferences of the tyres can lead to an unde-sure builts up more quickly on the slipping wheel, on one axle, as well as diagonally. sirable reduction in the engine output.  Changes to vehicle (e.g. on engine, on the brakes, on chassis or another combina-WARNING tion of tyres and wheels) can influence the function of the ESP  page 222, “Accesso- Carefully depress the accelerator when accelerating on uniformly slippery ries, changes and replacement of parts”. road surfaces, such as ice and snow. The driven wheels might still spin despite Electronic Differential Lock (EDL)* the EDL and affect the stability of the vehicle - risk of an accident!  You should always adapt your style of driving to the condition of road The electronic differential lock prevents an individual wheel from slip-surface and to the traffic situation even when your vehicle is fitted with EDL. ping. The increased safety offered must not tempt you to take greater risks than otherwise - risk of an accident! Models fitted with ESP are equipped with electronic differential lock (EDL). General Note The EDL makes it much easier, and sometimes at all possible, to start off, accelerate  If the ABS or ESP warning light comes on, this may also indicate a fault in the EDL. and climb a steep hill when the conditions of the road surface are unfavourable.Please have the vehicle inspected as soon as possible by a specialist garage. Operating principle  Changes to vehicle (e.g. on engine, on the brakes, on chassis or another combina- tion of tyres and wheels) can influence the function of the EDL  page 222, “Accesso- The EDL is activated automatically, that is without any action on the part of the driver. ries, changes and replacement of parts”. It monitors the speeds of the driven wheels with the aid of the ABS sensors. Should only one drive wheel begin spinning on a slippery surface there will be an appreciable difference in the speed of the driven wheels. The EDL function brakes the slipping wheel and the differential transmits a greater driving force to the other driven wheel. This control process is also accompanied by noises. Overheating of the brakes The EDL switches off automatically if unusually severe stresses exist in order to avoid excessive heat generation in the disc brake on the wheel which is being braked. The vehicle can continue to be driven and has the same characteristics as a vehicle not fitted with EDL.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders