owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 161 Friday, April 9, 2010 2:24 PM Transporting children safely 161 Child safety seats in Group 3 Attaching a child seat using the “ISOFIX” system Fig. 143 Child seat in Group 3 installed on the rear seat facing the direction of travel Fig. 144 Locking eyes (ISOFIX system) / the ISOFIX child seat is pushed into the mounting For children of about 7 years of age weighing between 22 and 36 kg and of a height of funnels less than 150 cm, the optimal solution is a child safety seat (seat bolster) in combina- tion with the three-point seat belt  fig. 143. There are two fixing eyes* between the seat backrest and the seat cushion of the front Children of more than 150 cm in height may use the seat belts fitted to the vehicle passenger seat for fixing the “ISOFIX” system child seat in place. The locking eyes on without a seat bolster. the rear outside seats are located below the upholstery. The places are marked with signs with the logo “ISOFIX” - left. WARNING Install child seat  When transporting a child on the front passenger seat, please comply with – Insert the mounting funnels A A onto the locking eyes A B between the seat back- the appropriate national regulations regarding the use of child safety seats. If rest and the seat cushion  fig. 144. required, the airbag has to be deactivated, – Push the notched arms of the child seat into the locking eyes in direction of arrow  in a specialist garage A 1 , until they are heard to lock in place  fig. 144 - right.  or by using the switch for the front passenger airbag*  page154, – Pull on both sides of the child seat! “Switch for the front passenger airbag”.  The shoulder part of the seat belt mu st run approximatel y across the middle One can mount a child safety seat using the “ISOFIX” system quickly, easily and reliably. of the shoulder and fit snugly against the chest. It must on no account run Please pay close attention to instructions from the manufacturer of the child safety across the neck. The lap part of the seat belt must run across the pelvis and fits seat when installing and removing the seat. snugly; it must not run over the belly. Tighten the belt webbing over your hip if Child seats fitted with the “ISOFIX” system can only be mounted and fixed in a vehicle necessary. fitted with an “ISOFIX” system when these child seats have been released for this type  Please comply with any differing national legal regulations regarding the of vehicle according to the ECE-R 44 standard. use of child safety seats. You can obtain child seats with the “ISOFIX” attachment system from specialist garages who will also installed it as well. Complete installation instructions are enclosed with the child safety seat. Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders