owners manual Skoda Citigo

all ratings: 0 average rating: 5

Raising the vehicle Securing wheels against theft Fig. ĖĖė Fig. ĖĖę Changing a wheel: Jacking points Principle sketch: Anti-theft for positioning lifting jack wheel bolt with adapter First read and observe the introductory information and safety warn- ings on page Ėėĝ. ä 0he anti-theft wheel bolts on vehicles fitted with them (one anti-theft wheel bolt per wheel) can only be loosened or tighten up by using the adapter provided. › Pull off the full wheel trim from the wheel rim or the cap from the anti-theft wheel bolt. › Insert the adapter B » Fig. ĖĖę with its toothed side fully into the inner tooth- ing of the safety wheel bolt A until the stop so that only the outer hexagon is jutting out. › Push the wheel wrench onto the adapter B up to the stop. › Loosen or tighten the wheel bolt » page ĖĘĕ. Fig. ĖĖĘ Attach lifting jack › After removing the adapter, reinstall the full wheel trim or place the cap onto the anti-theft wheel bolt. First read and observe the introductory information and safety warn- › Have the tightening torque checked with a torque wrench as soon as possible. ings on page Ėėĝ. ä It is advisable to make a note of the code number hammered into the rear side of Position the lifting jack by selecting the jacking point that is closest to the faulty the adapter or the rear side of the anti-theft wheel bolt. 0his number can be used wheel » Fig. ĖĖė. 0he jacking point is located directly below the engraving in the to purchase a replacement adapter from a ŠKODA Service Partner, if necessary. lower sill. 3e recommend that you always carry the adapter for the wheel bolts with you in › Position the lifting jack below the jacking point and move it up until its claw is Ð the vehicle. It should be stowed in the vehicle tool kit. positioned directly below the vertical web of the lower sill. › Align the lifting jack so that its claw grasps the web » Fig. ĖĖĘ –  below the embossing in the side surface of the lower sill. › Ensure that the entire surface of the lifting jack base plate rests on level ground and is located in a vertical position to the area » Fig. ĖĖĘ where the claw grasps the web. Ð › Continue turning up the jack until the wheel is just about lifted off the ground. Do-it-yourselfĖĘĖ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders