owners manual Skoda Citigo

all ratings: 0 average rating: 5

3ARNING (Continued) 3ARNING ■ If the vehicle is subsequently fitted with tyres which are different to those it ■ 0he factory-supplied lifting jack is only intended for your model of vehicle. was fitted with at the works, follow these guidelines » page ĖėĖ, New wheels 1nder no circumstances attempt to lift heavier vehicles or other loads – risk of and tyres. injury! ■ Always raise the vehicle with the doors closed. ■ Ensure that the vehicle tool kit is safely secured in the luggage compart- ■ Never position any body parts, such as arms or legs under the vehicle, while ment. the vehicle is raised with a lifting jack. ■ Secure the base plate of the lifting jack with suitable means to prevent pos- Note sible moving. A soft and slippery ground under the base plate may move the lifting jack, causing the vehicle to fall down. It is therefore always necessary to Ð Ensure that the box is always secured with the strap. place the lifting jack on a solid surface or use a wide and stable base. 1se a non-slip base (e.g. a rubber foot mat) if the surface is smooth, such as cobbled stones, tiled floor, etc. Changing a wheel ■ Never start the engine with the vehicle sitting on the raised jack – danger of suffering injury. ■ Only attach the lifting jack to the attachment points provided for this pur- äIntroduction pose. 0his chapter contains information on the following subjects: CA10ION Preliminary work Ėėĝ Changing a wheel ĖėĞ ■ 0he prescribed tightening torque of the wheel bolts for steel and light alloy Subsequent steps ĖėĞ wheels is Ėėĕ Nm. Loosening and tightening wheel bolts ĖĘĕ ■ If the anti-theft wheel bolt is fastened too tightly, it can cause damage to the Raising the vehicle ĖĘĖ anti-theft wheel bolt and adapter. Securing wheels against theft ĖĘĖ Note 3ARNING ■ 0he anti-theft wheel bolt set and adapter can be purchased from a ŠKODA Serv- ■ If you are in flowing traffic, switch on the hazard warning light system andice Partner. ■ Ð set up the warning triangle at the prescribed distance! 0he national legal re-0he national legal requirements must be observed when changing a wheel. quirements must be observed. In this way you are not only protecting yourself but other road users as well. ■ If the wheel is damaged or in the event of a puncture, park the vehicle as farPreliminary work away as possible from the flow of traffic. Park on as flat and firm a surface as possible. First read and observe the introductory information and safety warn- ■ If the wheel has to be changed on a slope, first of all block the opposite ings on page Ėėĝ. ä wheel with a stone or similar object to prevent the vehicle from unexpectedly 0he following steps must be carried out before actually changing the wheel: rolling away. › In the event of a puncture, park the vehicle as far away as possible from the flow of traffic. 0he place you choose should be level. £ Ėėĝ Do-it-yourself

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders