owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 72 Friday, April 9, 2010 2:24 PM 72 Seats and Stowage If you wish to be able to retrieve the settings which are stored in the memory by also Retrieving settings with remote control using the radio remote control, you have to assign the radio remote control to a – If the driver door is closed and the ignition is switched off, briefly press the unlock memory button in each case. button of the radio remote control  page 44 and then open the driver door. If you wish, you can obtain an additional remote control key from a specialist garage – The seat and exterior mirrors now move automatically into the stored positions. and then assign the remote control key to another memory button. Retrieving setting of exterior mirror for reversing* Note – Turn the rotary knob for the exterior mirror setting into the position   page 67  If the radio remote control had previously been assigned to another memory before engaging the reverse gear. button, this setting is then erased by the new assignment.  If you assign the radio remote control to a memory button which has already been The mirror returns into its initial position, after the rotary knob is moved out of the assigned to a radio remote control, the old assignment is also replaced by a new position  and put into another position or if the speed is more than 15 km/h. assignment in this case. Emergency Off  The assignment of the radio remote control to a memory button is retained, You can interrupt the setting operation at any time, if you operate any button of the however, after reassigning the seats and exterior mirrors. driver seat.  After the successful assignment, the turn signal lights flash and an audible signal will sound as a confirmation. The setting is stored with the memory button which you Head restraints have selected. Retrieving settings of the seat and mirrors You can retrieve the stored settings either with the memory buttons or with the remote control*. Retrieving settings with memory buttons – In order to retrieve the stored setting, you have two possibilities: – By pressing briefly: briefly press the desired memory button B page71, A fig. 57. The seat and exterior mirror are moved automatically into the stored posi- tions (this applies only if the ignition is switched on and the speed is less than 5 Fig. 58 Head restraint: Adjusting / pulling out km/h). Best protection is achieved if the top edge of the head restraint is at the same level as – By pressing for a long period of time: press and hold the desired memory button the upper part of your head. A B pressed long enough until the seat and the exterior mirrors are moved into the stored positions. Adjusting the height of a head restraint – Grasp the side of the head restraint with both hands and push the head restraint up or down in direction of arrow 1  fig. 58. A

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders