owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 71 Friday, April 9, 2010 2:24 PM Seats and Stowage 71 WARNING (continued) – Turn the exterior mirror control to position   page 67.  The seat backrests must not be angled too far back when driving otherwise – Engage the reverse gear. this will affect proper operation of the seat belts and of the airbag system - risk – Move the right exterior mirror into the desired position  page 67. of injury! – Take the vehicle out of gear. The set position of the exterior mirror is stored. Note Memory buttons If the movement of the seat is inadvertently interrupted during an adjustment, once Memory for the seat offers the possibility to store the individual driver seat and again press the switch in the appropriate direction and continue with the adjustment external mirror position. An individual position can be allocated to each of the three of the seat to the end. memory buttons A B  fig. 57, that is three in total. After pressing the corresponding memory button A B , the seat and the exterior mirror are automatically moved into the positions which have been allocated to this button  page 71. Storing setting Emergency Off You can interrupt the setting operation at any time, if you operate any button of the driver seat. Note  For safety reasons, it is not possible to store this position if the inclination angle of the seat backrest is more than 102° in relation to the seat cushion. Fig. 57 Driver seat: Memory buttons and  When storing settings with the memory buttons, we recommend that you begin SET button with the front button and assign a memory button to each additional driver.  Each new setting stored with the same button erases the previous setting. Storing seat and exterior mirror settings for driving forward Each time you store the seat and exterior mirror settings for driving forward you – Switch on the ignition. also have to re-store the individual setting of the exterior mirror on the passenger side for reversing. – Adjust the seat page70. – Adjust both exterior mirrors page67. Assigning the remote control key to the memory buttons A – Press button SET Afig.57. After storing the settings of the seat and exterior mirrors, you have 10 seconds in order – Press one of the memory buttons A B within 10 seconds after pressing the button to assign the radio remote control to the appropriate memory button. SET - an acknowledgement signal confirms that the seat setting is stored.– Withdraw the ignition key. Storing exterior mirror setting for reversing* – Press the unlock button page44, after the successful assignment an audible – Switch on the ignition. signal will sound. The setting is stored with the memory button which you have selected. Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders