owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 65 Friday, April 9, 2010 2:24 PM Lights and Visibility 65 Activation/deactivation You should remove stubborn dirt (such as in sect residues) from the headlight lenses at The function of the automatic rear window wiper is activated/deactivated in the infor-regular intervals, for example when refuelling . Please refer to the following guidelines mation display* in the menu: page196, “The headlight lenses”.  Setup You should remove any snow from the fixtures of the washer nozzles and clear ice in  Lights & Vision (Lights & Vision) winter with a de-icing spray in order to ensure proper operation of the cleaning system.  Rear wiper Replacing wiper blades for the windscreen wipers Note The function of the automatic rear window wiper is only valid for vehicles which are equipped with the information display*. The function is activated in the factory. Alternative park position of the rear window wiper Each time after switching off the engine for the second time, the wiper blade of the rear window wiper is tilted. Thus, the life of the wiper blade is prolonged. Fig. 51 Wiper blade for the windscreen Activating wiper – Switch on the ignition. One cannot fold out the wiper arms in the rest position from the windscreen. Before – Push the operating level into the position A 6  page 63, fig. 50 five times in replacing the wiper arms you must put them into the service position. succession within 5 seconds. – Switch off the ignition. After switching on the ignition again, the alternative park Service position for changing wiper blades position of the rear window wiper is activated. – Close the bonnet. For deactivating the alternative park position of the rear window wiper, proceed in the – Switch the ignition on and then again off. same way. 4 – Then press the windscreen wiper lever in the position A  page 63, fig. 50 within 10 seconds - the wiper arms move into the service position. Headlight cleaning system* Taking off the wiper blade The headlights are being cleaned after the windscreen has been sprayed for the first – Fold windscreen wiper arm away from the windscreen. time and fifth time, the low beam or main beam are switched on and the windscreen wiper lever was held in the position A 5  page 63, fig. 50 for about 1 second. – Press the locking button A 1 fig. 51, in order to unlock the wiper blade and pull The headlight washer nozzles are moved forward out of the bumper by the water pres- off in the direction of arrow A 2 . sure for cleaning the headlights. Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders