owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 55 Friday, April 9, 2010 2:24 PM Lights and Visibility55 WARNING (continued) – After opening the driver's door, the function Coming Home is switched on. example rain or snow. For these conditions we recommend to switch on the low – Close all the doors and the boot lid and lo ck the vehicle. After a short time, switch beam ! all lights off. Depending on equipment fitted the function Coming Home switches on the following Note lights:  Do not affix any stickers in front of the light sensor, so that you do not impair its  Parking lights, function or put it out of operation.  Low beam,  The same principles as for using the automatic light control also apply to the light  Entry lighting in the exterior mirrors, which is switched on manually page53.  Licence plate light. Cornering lights* Coming Home Function The lights go out 10 seconds after closing all the doors and the boot lid. The cornering lights are used to illuminate the curves by means of the cone of light If a door or the boot lid re mains open, the lights go out 60 seconds after switching off swiveling together with the front headlight with Xenon lights*. This function is active the ignition. when the speed of the car increases to more than 10km/h. The swiveling function of the headlights can be switched off / on via the menu point On vehicles fitted with automatic driving lamp control you can also switch the light Assistants in the main menu of the information display* page24.switch in the position . The function Coming Home is controlled with the light sensor in the mount of the interior rear mirror. If the light intensity is higher than the set value of the light sensor, the Coming Home Function is not switched on after WARNING switching off the ignition. If the cornering lights are defective, the headlights are automatically lowered to the emergency position, which prevents a possible dazzling of oncoming traffic. Note Thus the illuminated length of the road is shortened. Drive carefully and have  If the Coming Home Function is switched on constantly, the battery will be heavily the car inspected immediately by a specialist garage.discharged particularly in short-haul traffic. Coming Home Function  The switching on of the described lights should only be undertaken in accordance with the legal requirements. The function makes it possible to switch on the lights in the darkness for a short time  You can change the illumination period for the Coming Home Function by means after leaving the vehicle. of the information display*. Switching on Coming Home Function Leaving Home Function – The light switch is in the position automatic driving lamp control  and the low This function makes it possible to switch on the lights when approaching the vehicle. beam illuminates. – Switch off the ignition. Using the systemSafety Driving Tips General MaintenanceBreakdown assistanceTechnical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders