owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 66 Friday, April 9, 2010 2:24 PM 66 Lights and Visibility Attaching a wiper blade Replacing the wiper blade on the rear window wiper – Push the wiper blade until it locks up to the stop. – Check whether the wiper blade is correctly attached. – Fold the windscreen wiper arm back onto the windscreen. The wiper arms move back into the rest position - after switching on the ignition and after changing the position of the window wiper lever or when driving at a speed greater than 6°km/h. Wiper blades in proper condition are essential to obtain good visibility. Wiper blades should not be allowed to become dirtied by dust, insect remains and preserving wax.Fig. 52 Wiper blade for rear window Juddering or smearing of the wiper blades could then be due to wax residues left on Taking off the wiper blade the windscreen by vehicle washing in automatic vehicle wash systems. It is therefore important to degrease the lips of the wiper blades after every pass through an auto-– Fold windscreen wiper arm out from the windscreen and position the wiper blade matic vehicle wash system. at right angles to the wiper arm  fig. 52. – Hold the window wiper arm at the top end with one hand. WARNING – With the other hand unlock the locking button A 1 and remove the wiper blade in  If the windscreen wipers are handled carelessly, there is a risk of damage to the direction of arrow A 2 . the windscreen.  You should clean the wiper blades regularly with a windscreen cleaner in Attaching a wiper blade order to avoid any smears. Clean a wiper blade with a sponge or cloth if it is very – Push the wiper blade until it locks up to the stop. dirty, for example from insect residues. – Check whether the wiper blade is correctly attached.  Replace the wiper blades once or twice a year for safety reasons. The wiper blades are available from specialist garages. – Fold the windscreen wiper arm back onto the windscreen. The same remarks apply here as for page65. Rear-view mirror Manual dimming interior rear-view mirror Basic setting – Pull the lever on the bottom edge of the mirror forward.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders