owners manual Skoda Citigo

all ratings: 0 average rating: 5

CA10ION Changing a stored speed ■ Always depress the clutch pedal if switching to the neutral position (vehicle First read and observe the introductory information and safety warn- with a manual gearbox) when the cruise control system is switched on! Otherwise ings on page ěĘ. ä the engine can rev up unintentionally. ■ 0he cruise control system is not able to maintain a constant speed when driving Increasing the speed with the accelerator in areas with steeper gradients. 0he weight of the vehicle increases the speed at › Depress the accelerator to increase the speed. which it travels. 0herefore, shift to a lower gear in good time or slow the vehicle › Release the accelerator to reduce the speed back down to the preset speed. down by applying the foot brake. However, if the saved speed is exceeded by more than Ėĕ km/h for a period of more than Ě minutes by depressing the accelerator, the stored speed is deleted Note from the memory. 5ou have to re-store the desired speed. It is not possible on vehicles fitted with an automatic gearbox to switch on the Increasing the speed with the rocker button B Ð cruise control system if the selector lever is in the position N or R. › Press the rocker button B » Fig. ěĝ on page ěę into the RES position. › 0he speed will increase continuously, if the rocker button is pressed and held in the RES position. Release the rocker button once the desired speed is reached. Storing a speed 0he set speed is then stored in the memory. Decreasing the speed Fig. ěĝ › 0he stored speed can be reduced by pressing the rocker button B » Fig. ěĝ on 0urn signal and main beam lever: page ěę into the position SE0. Rocker switch and switch of the › 0he speed will decrease continuously, if the rocker button is pressed and held cruise control system in the SE0 position. Release the rocker button once the desired speed is reached. 0he set speed is then stored in the memory. › If the rocker button is released at a speed of less than Ęĕ km/h, the speed is not stored and the memory is erased. 0he speed must then be stored again by pressing the rocker button B in the position SE0 after increasing the speed of the vehicle to more than Ęĕ km/h. 0he speed can also be reduced by depressing the brake pedal, which temporarily First read and observe the introductory information and safety warn- Ð deactivates the system. ings on page ěĘ. ä Storing a speed › 0urn the switch A » Fig. ěĝ into the ON position. Switching off the cruise control system temporarily › After the desired speed has been reached, press the rocker button B into the SE0 position. First read and observe the introductory information and safety warn- äings on page ěĘ. After you have released the rocker button B out of the position SE0, the speed you have just stored is maintained at a constant speed without having to depress 0he cruise control system is temporarily switched off by pressing the switch Ð the accelerator. A » Fig. ěĝ on page ěę » page ěę into the spring-tensioned position CANCEL or by depressing the brake or clutch pedal. 0he set speed remains stored in the memory. £ ěę 1sing the system

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders