owners manual Skoda Citigo

all ratings: 0 average rating: 5

1phill start assist Electronic differential lock (EDL) 0he uphill start assist makes it easier to start off on steep hills. 0he system holds the brake pressure produced by the activation of the brake pedal for approx. First read and observe the introductory information and safety warn- ė seconds after the brake pedal is released. 0he driver can therefore move his äings on page Ěĝ. foot from the brake pedal to the accelerator pedal and start off on the slope, without having to actuate the handbrake. 0he brake pressure drops gradually the If one of the wheels starts to spin, the EDL system brakes the spinning wheel and more you operate the accelerator pedal. If the vehicle does not start off within ė transfers the driving force to the other wheels. 0his ensures the stability of the seconds, it starts to roll back. vehicle and a quick journey. 0he uphill start assist is active as of a Ě % slope, if the driver door is closed. It is 0he EDL switches off automatically if unusually severe stresses exist in order to always active on slopes when in forward or reverse start off. 3hen driving down- avoid excessive heat generation in the disc brake on the wheel which is being Ð hill, it is inactive. braked. 0he vehicle can continue to be driven and has the same characteristics as a vehicle not fitted with EDL. 0he EDL switches on again automatically as soon as Ð the brake has cooled down. Antilock brake system (ABS) First read and observe the introductory information and safety warn- Shifting (manual gearbox) äings on page Ěĝ. ABS prevents the wheels locking when braking. 0hus helping the driver to main- Fig. ěĚ tain control of the vehicle. Shift pattern of the Ě-speed 0he intervention of the ABS is noticeable from the pulsating movements of the manual gearbox brake pedal which is accompanied by noises. Do not reduce the pressure on the brake pedal during the intervention of the ABS. 0he ABS deactivates if the brake pedal is released. Never interrupt the appli- Ð cation of the brakes during the intervention of the ABS! 0raction control (0C) Always depress the clutch pedal fully when changing gear, to prevent excessive wear of the clutch. First read and observe the introductory information and safety warn- äings on page Ěĝ. 0he gearshift indicator must be observed when changing gear » page Ėĕ. If the wheels are slipping, the 0CS adapts the engine speed to the conditions ofOnly engage reverse gear when the vehicle is stationary. Depress the clutch pedal the road surface. 0he 0CS makes it much easier to start off, accelerate and climband hold it fully depressed. 3ait a moment before reverse gear is engaged to steep hills even if the conditions of the road surface are unfavourable. avoid any shift noises. During an intervention of the system, the warning light  flashes in the instru-0he reversing lights will come on once reverse gear is engaged, provided the igni- ment cluster. tion is on. If there is a fault in the 0CS, the warning light then lights up in the instrument 3ARNING Ð cluster  » page ĖĜ. Never engage reverse gear when driving – risk of accident! £ Starting-off and DrivingěĖ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders