owners manual Skoda Citigo

all ratings: 0 average rating: 5

Faults in the brake surface 0he handbrake warning is activated if the vehicle is driven at a speed of more Ð If it is found that the braking distance has suddenly become longer and that thethan ě km/h for more than Ę seconds. brake pedal can be depressed further, the brake system may be faulty. 2isit a ŠKODA specialist garage immediately and adjust your style of driving appropriate- ly as you will not know how great the damage is. Stabilisation control (ESC) Low brake fluid level First read and observe the introductory information and safety warn- An insufficient level of brake fluid may result in problems in the brake system. 0he äings on page Ěĝ. level of the brake fluid is monitored electronically » page ĖĚ, Brake system . 0he ESC is automatically activated after starting the engine. 0he ESC helps to Brake booster maintain control of the vehicle in situations where it is being operated at its dy- 0he brake booster increases the pressure generated with the brake pedal. 0he namic limits, such as a sudden change to the direction of travel. 0he risk of skid- Ð brake booster only operates when the engine is running. ding is reduced and your car thus offers greater driving stability depending on the conditions of the road surface. Handbrake 0he direction which the driver wishes to take is determined based on the steering angle and the speed of the vehicle and is constantly compared with the actual behaviour of the vehicle. In the event of deviations, such as if the car starts to Fig. ěę skid, the ESC automatically brakes the appropriate wheel. Centre console: Handbrake During an intervention of the system, the warning light  flashes in the instru- ment cluster. If there is an ESC fault, the warning light then lights up in the instrument cluster  » page ĖĜ. 0he following systems are integrated into the electronic stabilisation control (ESC): ›Antilock brake system (ABS), ›0raction control (0CS); First read and observe the introductory information and safety warn- ›Electronic Differential Lock (EDL) ings on page Ěĝ. ä ›Brake assist, Apply ›1phill start assist. › Pull the handbrake lever firmly upwards. Hydraulic brake assist Loosening 0he Brake Assist is activated by the very quick operation of the brake pedal. It in- › Pull the handbrake lever up slightly and at the same time push in the lockingcreases the braking effect and helps to shorten the braking distance. 0o achieve button » Fig. ěę. the shortest possible braking distance, the brake pedal must be applied firmly › Move the lever right down while pressing the lock button. and held in this position until the vehicle has come to a complete standstill. 0he ABS is activated faster and more effectively with the intervention of the 0he handbrake warning light  lights up when the handbrake is applied, provided brake assist system. the ignition is on. 0he brake assist function is automatically switched off when the brake pedal is A warning signal sounds if the vehicle is inadvertently driven off with the hand- released. £ brake applied. ěĕ 1sing the system

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders