owners manual Seat Ateca

all ratings: 0 average rating: 5

The essentials Do not pull too hard with the towing vehicleTow-starting Jump leads must comply with standard DIN ake care to avoid jerking the tow rope. 72553 (see cable manufacturer's instruc- and t When towing on an unpaved road, there is al-If the engine will not start, first try starting ittions). The wire cross section must be at least 2 ways a risk of overloading and damaging theusing the battery of another vehicle25 mm for petrol engines and at least 2 anchorage points. ››› page 58. You should only attempt to tow-35 mm for diesel engines. start a vehicle if charging the battery does Switch on the ignition so that the turn sig- not work. This is done by leveraging wheel Note nals, windscreen wipers and windscreen movement. ● The vehicles must not touch each other, washer can work. Ensure that the steering otherwise electricity could flow as soon as wheel is unlocked and moves freely. When tow-starting a vehicle with a petrol en- the positive terminals are connected. gine, do not tow it more than a short dis- Place the gear lever in neutral on vehicles tance, otherwise unburned fuel can enter the● The discharged battery must be properly with a manual gearbox. With an automatic catalytic converter. connected to the on-board network. gearbox, place the lever in N. ●Engage 2nd or 3rd gear before moving off. To brake, press the brake pedal firmly. The brake servo does not work when the engine●Press the clutch and hold the pedal down. is switched off. ●Switch the ignition on. The power steering only works when the igni-● Once both vehicles are moving, release the tion is switched on and the vehicle is moving, clutch. provided that the battery is sufficiently charg- ●As soon as the engine has started, press ed. Otherwise, it will need more force. the clutch and move the gear lever to neutral. Ensure that the tow rope remains taut at all times. How to jump start ››› in Introduction on page 86  Jump leads ››› page 86  The jump lead must have a sufficient wire cross section. If the engine fails to start because of a dis- charged battery, the battery can be connec- ted to the battery of another vehicle to start the engine. 58

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders