owners manual Seat Ateca

all ratings: 0 average rating: 5

The essentials ●Tighten the wheel bolts in diagonal pairs Subsequent work the jack* could slip as it does not have an using the wheel brace. adequate grip on the vehicle: risk of injury! ●Alloy wheels: replace the wheel bolt caps. ● The height of the parked vehicle can The wheel bolts should be clean and turn ●Plate wheels: fit the central wheel rim again change as a result of variations in tempera- easily. Before fitting the spare wheel, inspect ture and loading. ››› page 54. the wheel condition and hub mounting surfa- ces. These surfaces must be clean before fit-● Return all tools to their proper storing loca- ting the wheel. CAUTION tion. ●If the replaced wheel does not fit in the The vehicle must not be raised on the cross- bar. Only place the jack* on the points de- spare wheel housing, store it safely in the Tyres with compulsory direction of ro- signed for this purpose on the strut. Other- luggage compartment ››› page 149.  wise, the vehicle may be damaged.tation ●Check the tyre pressure of the newly moun- ted tyre as soon as possible. A directional tread pattern can be identified ●In vehicles fitted with a tyre pressure indi- y b the arrows on the sidewall that point in Removing and fitting a wheel cator, adjust the pressure and store the read- the direction of rotation. Always observe the ing in the radio/Easy Connect system* direction of rotation indicated when fitting Change the wheel after loosening the wheel ››› page 295.  the wheel to guarantee optimum properties bolts and raising the vehicle with the jack. of this type of tyres with regard to grip,●Have the tightening torque of the wheel noises, wear and aquaplaning. bolts checked as soon as possible with a tor- Taking off the wheel que wrench (it should be 140 Nm). Mean- If it is absolutely necessary to fit the spare ●Unscrew the wheel bolts using the box while, drive carefully. tyre* against the direction of rotation, drive spanner and place them on a clean surface. ●Have the flat tyre replaced as quickly as with care as this means the tyre does not of- ●Take off the wheel. possible. fer optimum driving properties. This is of par- ticular importance when the road surface is Putting on the spare wheel wet. When fitting tyres with a compulsory rotation To return to directional tread tires, replaceSnow chains direction, observe the instructions in the punctured tyre as soon as possible and ››› page 56. restore the obligatory direction of rotation of Use all tyres. ●Mount the wheel. Snow chains should only be used on the ●Screw on the wheel bolts in position and front wheels. tighten them loosely with a box spanner. ●Carefully lower the vehicle using the jack*. 56

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders