owners manual Subaru Outback

all ratings: 0 average rating: 5

7-20 Starting and operating/Remote engine start system (dealer option) &Entering the vehicle while itmodels with “keyless access with push-To engage or disengage service mode: is running via remote startbutton start system”, press the push-1. Enter the vehicle and close all vehicle button ignition switch while depressingdoors and the rear gate/trunk lid. 1. Unlock the vehicle doors using thethe brake pedal to restart the engine.2. Verify that the select lever is in the “P” keyless access function (if equipped) or position (CVT models) remote keyless entry system, then open&Entering the vehicle follow- the door(s). If the vehicle’s doors are 3. Depress and hold the brake pedal unlocked manually using the key, theing remote engine start shut-4. Turn the ignition switch to the “ON” vehicle’s alarm system will trigger whendown position a door is opened (if the alarm system isAnalarmtrigger mayoccurif the vehicle is5. Press and release the remote engine armed prior to activating the remote opened by the remote keyless entrystart transmitter “ ” button three times. engine start system) and the engine willsystem/keyless access function within aThe system will honk the vehicle’s horn turn off. Perform either of the followingfewsecondsimmediatelyfollowingremoteeach time the button is pressed. procedures to disarm the alarm system.engine start shutdown.6. The system will pause for 1 second Refer to “Alarm system” F2-27. then honk the vehicle’s horn three times to . Insert the key into the ignition switch&Pre-heating or pre-coolingindicate that the service mode has been andturnit to the “ON” position (modelsthe interior of the vehicleengaged or honk one time to indicate that without “keyless access with push-Before exiting the vehicle, set the tem-the service mode has been disengaged. button start system”) perature controls to the desired setting . Pushthe push-button ignition switchand operation. After the system starts theNOTE to the “ACC” or “ON” position (modelsengine, the heater or air conditioning willWhentakingyourvehicleinforservice, with “keyless access with push-buttonactivate and heat or cool the interior toit is recommended that you inform the start system”) your setting. service personnel that your vehicle is . Press any button on the access key/ equipped with a remote engine start remote keyless entry transmitter.&Service mode (models with-system. 2. Enter the vehicle. out “keyless access with 3. The engine will shut down when anypush-button start system”)&Remotetransmitter program door or rear gate is opened.In service mode, the remote engine start(models without “keyless ac- 4. For models without “keyless accessfunction is temporarily disabled to preventcess with push-button start with push-button start system”, insert thethe system from unexpectedly starting thesystem”) key into the ignition switch and turn to theengine while being serviced.New transmitters can be programmed to “START”positiontorestart the engine. For the remote engine start system in the

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders