owners manual Subaru Outback

all ratings: 0 average rating: 5

Starting and operating/Starting and stopping engine (models with push–button start system)7-13 NOTE indicator does not turn green. . When the push-button ignition 5. While depressing the brake pedal, switch is pressed while depressing press the push-button ignition switch. the brake pedal, the engine starter operates for a maximum of 10 seconds NOTE andafterstartingtheengine,thestarter . While pressing the select lever but- stops automatically. ton in, the indicator on the push-button . When the push-button ignition ignition switch will not turn green even switch is pressed while depressing when the select lever is in the “P” the brake pedal, the engine can be position. started regardless of the power status. . In case the engine does not start by . If the security indicator light illumi- the normal engine start procedure, nates when you attempt to start the move the select lever to the “P” posi- engine but the engine does not start,1)Operation indicator press the push-button ignition switch2)Push-button ignition switchtion, and switch the power to “ACC”. to switch the power to “OFF” and thenWhen the push-button ignition switch isDepress the brake pedal, and press the try to start the engine again.pressedwhile depressing the brake pedal,push-button ignition switch for at least . If the engine does not start, pressthe engine will start. The starting proce-15seconds.Theenginemaystart.Only the push-button ignition switch withoutdure for the engine is as follows.use this engine start procedure in case depressing the brake pedal to switch of emergency. the power to “OFF”. Then, while de-1. Carry the access key, and sit in the. When the engine is not started, the pressing the brake pedal more force-driver’s seat. brake pedal may feel stiff. In such a fully, press the push-button ignition2. Apply the parking brake.case, depress the brake pedal more switch. 3. Shift the select lever into the “P”forcefully than usual. Check that the . The engine start procedures mayposition. The engine can also start whenoperation indicator on the push-button not function depending on the radiothe select lever is in the “N” position,ignition switch turns green, and press wave conditions around the vehicle. Inhowever, for safety reasons, start in thethe push-button ignition switch to start such a case, refer to “Starting engine”“P” position. the engine. F9-19. 4. Depress the brake pedal until the . If the vehicle battery is discharged,operation indicator on the push-button the steering cannot be unlocked. ignition switch turns green. When starting Charge the battery. with the select lever in the “N” position, the – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders