owners manual Subaru Forester

all ratings: 0 average rating: 5

Starting and operating/Remote engine start system (dealer option)7-19 &Remotetransmitter program honk the horn one time, indicating that the! Changing the battery (models without “keyless ac-system has learned the transmitter. Upon cess with push-button startsuccessful programming, the remote start CAUTION system”) confirmation transmitter button will flash one time. . Donotletdust,oilorwatergeton New transmitters can be programmed to7. Repeat step 5 for any additionalor in the remote engine start the remote engine start system in thetransmitters (the system will accept up totransmitter when replacing the event that a transmitter is lost, stolen,eight transmitters). battery. damaged or additional transmitters are8. The system will exit the transmitter. Be careful not to damage the desired (the system will accept up to eightlearn mode if the key is turned to theprinted circuit board in the re- transmitters). New remote engine start“LOCK” position, the door is closed ormote engine start transmitter transmitters can be programmed accord-after 2 minutes. when replacing the battery. ing to the following procedure. . Becarefulnottoallowchildrento 1. Open the driver’s door (the driver’s&Systemmaintenance touch the battery and any re- door must remain opened throughout theNOTE moved parts; children could entire process). swallow them. 2. Depress and hold the brake pedal.For models without “keyless access with push-button start system”:. There is a danger of explosion if 3. Turn the ignition switch to “ON” thenIn the event that the vehicle’s battery isan incorrect replacement battery “LOCK”, back to “ON” then “LOCK”, backreplaced, discharged or disconnected,is used. Replace only with the to “ON” then “LOCK”, then back to “ON”it will be necessary to start the vehiclesame or equivalent type of bat- again and leave the ignition “ON” through-a minimum of one time using the keytery. out the programming process. prior to activating the remote engine. Batteries should not be exposed 4. The system will flash the side markerstart system. This is required to allowto excessive heat such as sun- lights, tail lights and parking lights andthe vehicle electronic systems to re-shine, fire or the like. honk the horn three times, indicating thatsynchronize. the system has entered the transmitter For models with “keyless access with learn mode. push-button start system”: 5. Press and release the “ ” button on Perform the procedure described in “Re- the transmitter that you want to program. placing access key battery” F11-45. 6. The system will flash the side marker lights, tail lights and parking lights and – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders