owners manual Nissan Murano

all ratings: 0 average rating: 5

Black plate (356,1) R(Reverse): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Accelerator downshift — In D position — GUID-CD19E66D-4772-4785-B00D-BC9BC6AC4E04 Use this position to back up. Make sure the For passing or hill climbing, fully depress the vehicle is completely stopped before selecting accelerator pedal to the floor. This shifts the the R (Reverse) position. The brake pedal transmission down into a lower gear, depending must be depressed and the selector lever on the vehicle speed. button pushed in to move the selector High fluid temperature protection mode lever from P (Park), N (Neutral) or any GUID-FE0DB0A0-F4AF-44F6-8609-E1599FEA814D driving position to R (Reverse). This transmission has a high fluid temperature N(Neutral): protection mode. If the fluid temperature be- GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 comes too high (for example, when climbing Neither forward nor reverse gear is engaged. steep grades in high temperature with heavy The engine can be started in this position. You loads, such as when towing a trailer), engine may shift to N (Neutral) and restart a stalled power and, under some conditions, vehicle engine while the vehicle is moving. SSD0692 speedwill be decreased automatically to reduce D(Drive): the chance of transmission damage. Vehicle GUID-D73A39BF-43C8-459F-9C24-47B7F579C407Overdrive (O/D) OFF switch speed can be controlled with the accelerator Use this position for all normal forward driving. GUID-8A3D61C2-25AC-4088-A419-A1EAB3D4657F When the O/D OFF switch is pushed with the pedal, but the engine and vehicle speed may be L (Low): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407selector lever in the D (Drive) position, thelimited. Usethis position for maximum engine braking on indicator light in the instrument panel illuminates.Fail-safe steep downhill gradients/climbing steep slopes Use the overdrive off mode when you need GUID-CA9C7C97-9363-4621-960F-9DED536408A1 and whenever approaching sharp bends. Do not improved engine braking. If the vehicle is driven under extreme use the L position in any other circumstances. conditions, such as excessive wheel spin- To turn off the overdrive off mode, push the O/D ning and subsequent hard braking, the OFF switch again. The indicator light will fail-safe system may be activated. The MIL turn off. may illuminate to indicate the fail-safe Each time the engine is started, or when the mode is activated. (See “Malfunction In- selector lever is shifted to any position other dicator Light (MIL)” in the “2. Instruments than the D (Drive) position, the overdrive off andcontrols” section.) This will occur even mode will be automatically turned off. if all electrical circuits are functioning properly. In this case, place the ignition 5-16 Starting and driving [ Edit: 2011/ 7/ 18Model: Z51-D ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders