owners manual Nissan Murano

all ratings: 0 average rating: 5

Black plate (353,1) BEFORESTARTINGTHEENGINE STARTING THE ENGINE GUID-147FB3A5-0560-4EED-8FD9-82CD1174F15F GUID-F37FF9D7-0BFA-4B95-99B8-BFD3E3B48784 the Intelligent Key out of the port. . Make sure the area around the vehicle is 1. Apply the parking brake. NOTE: clear. 2. Move the selector lever to the P (Park) or N The key port does not charge the key . Check fluid levels such as engine oil, cool- (Neutral) position. (P is recommended.) battery. If you see the low battery indicator ant, brake fluid and window washer fluid as Thestarter is designed not to operate unless in the dot matrix liquid crystal display, frequently as possible, or at least whenever the selector lever is in either of the above replace the battery as soon as possible. you refuel. positions. (See “Intelligent key battery replacement” . Check that all windows and lights are clean. 3. Push the ignition switch to the ON position. in the “8. Maintenance and do-it-yourself” . Visually inspect tires for their appearance Depress the brake pedal and push the section.) and condition. Also check tires for proper ignition switch to start the engine. inflation. . Lock all doors. To start the engine immediately, push and CAUTION . Position seats and adjust head restraints/ release the ignition switch while depressing headrests. the brake pedal with the ignition switch in . Never place anything except the any position. Intelligent Key in the key port. Doing . Adjust inside and outside mirrors. . If the engine is very hard to start in so may cause damage to the equip- . Fasten seat belts and ask all passengers to extremely cold weather or when restart- ment. do likewise. ing, depress the accelerator pedal a little . Make sure the Intelligent Key is in . Check the operation of warning lights when (approximately 1/3 to the floor) and while the correct direction when inserting the ignition switch is pushed to the ON holding, crank the engine. Release the it to the key port. The engine may position. (See “Warning/indicator lights and accelerator pedal when the engine starts. not start if it is in the incorrect audible reminders” in the “2. Instruments . If the engine is very hard to start because direction. and controls” section.) it is flooded, depress the accelerator . RemovetheIntelligent Key from the pedal all the way to the floor and hold it. key port after the ignition switch is Push the ignition switch to the ON pushed to the OFF position. position to start cranking the engine. After 5 or 6 seconds, stop cranking by pushing the ignition switch to OFF. After cranking the engine, release the accel- erator pedal. Crank the engine with your foot off the accelerator pedalby Starting and driving 5-13 [ Edit: 2011/ 7/ 18Model: Z51-D ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders