or
owners manual Hyundai i30
owners manual Hyundai i30 - year of production: 2012 - Hyundai i30 II 2 owners manual EN
Document:
pdf (9.83 MB) 457 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Hyundai i30, year of production 2012:
What to do in an emergency
Wheel nut tightening torque: CAUTION
Steel wheel & aluminum alloy wheel:Your vehicle has metric threads
9~11 kg·m (65~79 lb·ft) on the wheel studs and nuts.
Make certain during wheel
If you have a tire gauge, remove theremoval that the same nuts that
valve cap and check the air pressure.were removed are reinstalled -
or, if replaced, that nuts with
If the pressure is lower than recom-
metric threads and the same
mended, drive slowly to the nearest
chamfer configuration are used.
service station and inflate to the cor-
Installation of a non-metric
rect pressure. If it is too high, adjust
thread nut on a metric stud or
OGD061013 it until it is correct.Always reinstall
vice-versa will not secure the
the valve cap after checking or
Then position the wrench as shown wheel to the hub properly and
adjusting tire pressure. If the cap is
in the drawing and tighten the wheel will damage the stud so that it
not replaced, air may leak from the
nuts. Be sure the socket is seated must be replaced.
completely over the nut.Do not standtire. If you lose a valve cap, buy
another and install it as soon as pos-Note that most lug nuts do not
on the wrench handle or use an
sible. have metric threads. Be sure to
extension pipe over the wrench han- use extreme care in checking
After you have changed wheels,
dle. Go around the wheel tightening for thread style before installing
always secure the flat tire in its place
every nut following the numerical aftermarket lug nuts or wheels.
and return the jack and tools to their
sequence shown in the image until If in doubt, we recommend that
proper storage locations.
they are all tight.Then double-check you consult with an authorized
each nut for tightness.After changing HYUNDAI dealer.
wheels, we recommend that the
wheel nuts be tighten by an author-
ized HYUNDAI dealer to their proper
torque as soon as possible.
6 12
Download PDF
Click here to download a pdf file with an instruction manual for Hyundai i30
year of production from: 2012
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Hyundai i30 II 2 owners manual
pages 337 - 343
Hyundai i30 II 2 owners manual
page 340 / 457
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF