Mitsubishi Eclipse II technical information manual page 336

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Eclipse, year of production 1995 - 1999:

INTERIOR - Supplemental Restraint System (SRS) 6-25 3. Diagnostic function Fault diagnosis continues to be performed during the period the ignition switch is ON except during cranking. If a fault is detected, the SRS warning light is lit. The microcomputer determines a diagnostic code on the basis of the results of measurements by various measuring circuits and stores it in “EEPROM”. The fault duration (the period the warning light has been ON) is integrated in increments of a minute and stored in the EE- PROM together with the diagnostic code. The stored data can 14x029 be read and erased by a scan tool. The number of times the memory has been erased by a scan tool is stored in the“EE- PROM” to provide reference information on the past service history. The data can be read by a scan tool in the same way as the fault durations. Data to be stored Description NOTE Once a fault is detected, the SRS warning light continues Faults All faults stored in to light, even if normal operation of the system is restored, diagnostic codes until the diagnostic code is erased. Fault duration The period the warning4. Automatic diagnostic code erasure function light is ON is integrated in minutes. The automatic diagnostic code erasure function operates according to the indicated diagnostic code No. (Refer to (Maximum stored period: 9999 minutes S 7 days) P.6-22). Once the malfunction location that causes a diag- nostic code to be displayed returns to the normal condition, Number of timesThe number of times the memory can diagnostic codes and fault if the malfunction reoccurs continuously at5-second inter- be erased durations have been vals, the appropriate malfunction code can be erased. At this time, if all other diagnostic codes have been erased, erased by a scan tool is in- tegrated. the SRS warning light will switch off and the intermittent durations of the malfunction will also be erased automatical- (Maximum number of ly. In this case, the erasure is not included in the number times to be stored: 250) of times erased. NOTE If the A/D converter inside the SRS diagnostic unit is mal- functioning, diagnostic codes No. 41, 42 and 43 will not be erased by the automatic diagnostic code erasure func- tion. Furthermore, during cranking, none of the codes will be erased by this function.

owners manual Mitsubishi Eclipse

owners manual Mitsubishi Eclipse - year of production: 1995, 1996, 1997, 1998, 1999 - Mitsubishi Eclipse II technical information manual EN