owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube owners manual EN

Document: pdf (3 MB) 329 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (311,1) INSTALLINGFRONTLICENSEPLATE ¯ EXCEPT FOR Krom MODELS Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. . License plate bracket . J-nut 6 2 . Screw 6 2 . Screw grommet 6 2 1.Park the vehicle on flat, level ground. 2.Locate the center position Aon the lower * part of the air duct. Measure straight down from the edge where the bumper and air duct meet to the aligning holes B , keeping * the tape measure lined up with the center position. 3.Mark the holes Bwith a felt-tip pen. * 4.Carefully drill the two aligning holesB * using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) 5.Line up the bossesCor license plate * bracket with the holes and hold the license STI0647 plate bracket in place. Technical and consumer information 9-11 Model "Z12-D" EDITED: 2009/ 9/ 17

Download PDF

Click here to download a pdf file with an instruction manual for Nissan Cube
year of production from: 2008

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.