Nissan Cube owners manual page 317

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (321,1) READINESS FOR INSPECTION/ EVENT DATA RECORDERS (EDR) MAINTENANCE(I/M) TEST Due to legal requirements in some states/areasThis vehicle is equipped with an Event Datament, could combine the EDR data with the type or provinces, your vehicle may be required to beRecorder (EDR). The main purpose of an EDR isof personally identifying data routinely acquired in what is called the “ready condition” for anto record, in certain crash or near crash-likeduring a crash investigation. Inspection/Maintenance (I/M) test of the emis-situations, such as an air bag deployment orTo read data recorded by an EDR, special sion control system. hitting a road obstacle, data that will assist inequipment is required and access to the vehicle The vehicle is set to the “ready condition” whenunderstanding how a vehicle’s systems per-or the EDR is needed. In addition to the vehicle itis driven through certain driving patterns.formed. The EDR is designed to record datamanufacturer and NISSAN dealer, other parties, Usually, the “ready condition” can be obtainedrelated to vehicle dynamics and safety systemssuch as law enforcement, that have the special by ordinary usage of the vehicle.for a short period of time, typically 30 secondsequipment, can read the information if they have or less. The EDR in this vehicle is designed toaccess to the vehicle or the EDR. EDR data will If a powertrain system component is repaired orrecord such data as:only be accessed with the consent of the vehicle the battery is disconnected, the vehicle may be.How various systems in your vehicle wereowner or lessee or as otherwise required or reset to a “not ready condition”. Before takingoperating; permitted by law. the I/M test, check the vehicle’s inspection/ maintenance test readiness condition. Place the.Whether or not the driver and passenger ignition switch in the ON position withoutsafety belts were buckled/fastened; starting the engine. If the Malfunction Indicator.How far (if at all) the driver was depressing Light (MIL) comes on steady for 20 seconds andthe accelerator and/or brake pedal; and, then blinks for 10 seconds, the I/M test condition is “not ready”. If the MIL does not.How fast the vehicle was traveling. blink after 20 seconds, the I/M test condition is “ready”. . Sounds are not recorded. Contact a NISSAN dealer to set the “readyThese data can help provide a better under- condition” or to prepare the vehicle for testing.standing of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a nontrivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g. name, gender, age and crash location) are recorded. However, other parties, such as law enforce- Technical and consumer information 9-21 Model "Z12-D" EDITED: 2010/ 4/ 14

owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube owners manual EN