owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube owners manual EN

Document: pdf (3 MB) 329 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (312,1) 6.Mark the center of the holes Dwith a felt- * tip pen. 7.Carefully drill the two pilot holes using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) 8.Insert grommets into the hole on the fascia. 9.Insert a flat-blade screwdriver into the grommet hole to add a 908 turn onto the part E . * 10. Insert a J-nut into the license plate bracket before placing the license plate bracket on the fascia. 11. Install the license plate bracket with the screws. 12. Install the license plate with bolts that are not longer than 0.55 in (14 mm). 9-12 Technical and consumer information Model "Z12-D" EDITED: 2009/ 9/ 17

Download PDF

Click here to download a pdf file with an instruction manual for Nissan Cube
year of production from: 2008

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.