owners manual Mitsubishi Lancer

owners manual Mitsubishi Lancer - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer VIII 8 owners manual EN

Document: pdf (60.3 MB) 434 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer, year of production 2007 - 2016:

Automatic air conditioning with Celsius scale (if so equipped) CAUTION When the setting has changed from dis- abled to enabled, Using recirculated air for a long time may cause the windows to fog up. the system will beep two times and the indicator light will flash three times. Personalizing the air selection NOTE (Changing the function setting) The factory setting is “Enable automatic air N00760000050 control”. While the mode selection dial is set to the You can change the following functions to match your preference. “ ” position, the air selection will auto- matically change to the outside air position, 7 Push the switch again and the air condition- Enable automatic air control: even if the system is set to “Disable auto- ing compressor will stop and the indicator matic air control”, in order to prevent win- When the mode selection dial or the dows from fogging up. light (A) goes off. blower speed selection dial is set to the “AUTO” position, the air selection switch CAUTION will also be automatically controlled. Air conditioning switch When using the air conditioning, the idling Disable automatic air control: N00737300301 speed may slightly increase as the air condi- tioning compressor is switched on/off auto- Push the switch, and the air conditioning Even when the mode selection dial or the compressor will turn on. The air conditioning matically. Especially for vehicles with a blower speed selection dial is set to the continuously variable transmission (CVT) or “AUTO” position, the air selection switch indicator light (A) will come on. Twin Clutch SST, while the vehicle is sta- will not be automatically controlled. A sound will be made every time you push the switch. tionary, fully depress the brake pedal to pre- Changing the settings vent the vehicle from creeping. Press the air selection switch for about 10 seconds or longer. When the setting has changed, the system will beep and the indicator light will flash. When the setting has changed from enabled to disabled, the system will beep three times and the indicator will flash three times. Comfort controls 7-25

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Lancer
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.