owners manual Mitsubishi Lancer

owners manual Mitsubishi Lancer - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer VIII 8 owners manual EN

Document: pdf (60.3 MB) 434 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer, year of production 2007 - 2016:

Manual air conditioning without MAX A/C mode (if so equipped) Push the switch again and the air condition- NOTE Operating the air conditioning ing compressor will stop and the indicator The factory setting is “Enable automatic air system control”. light (A) goes off. While the mode selection dial is set between N00731100219 CAUTION “ ” and “ ” position, the air selection Heating When using the air conditioning, the idling will automatically change to the outside air position, even if the system is set to “Disable speed may slightly increase as the air condi- tioning compressor is switched on/off auto- Set the mode selection dial to the “ ” posi- automatic air control”, in order to prevent windows from fogging up. matically. Especially for vehicles with a tion and set the air selection switch (A) to the continuously variable transmission (CVT) or outside air position. Twin Clutch SST, while the vehicle is sta- Turn the temperature control dial clockwise Air conditioning switch tionary, fully depress the brake pedal to pre- 7 vent the vehicle from creeping. or counterclockwise to the desired tempera- N00731000436 ture. Select the best speed to fit your needs. Push the switch, and the air conditioning compressor will turn on. The air conditioning NOTE indicator light (A) will come on. If a problem is detected in the air condition- A sound will be made every time you push ing compressor, the air conditioning indica- the switch. tor light (A) blinks. Press the air conditioning switch once to turn it off, then once more to turn it back on. If the air condi- tioning indicator light (A) does not blink, there is no problem. If it does blink, have it checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice. Sometimes, for example after using a high- pressure car wash, the condenser can get wet, and the air conditioning indicator light (A) NOTE blinks temporarily. Wait for a while, press For quick heating, set the blower speed the air conditioning switch once to turn the selection dial to the position shown in the system off, then once more to turn it back on. illustration. Once the water evaporates, the blinking will stop. Comfort controls 7-15

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Lancer
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.