Mitsubishi Lancer VIII 8 owners manual page 301

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer, year of production 2007 - 2016:

Automatic air conditioning with Celsius scale (if so equipped) NOTE Enable automatic air conditioning control: NOTE When the mode selection dial or blower If a problem is detected in the air condition- While the mode selection dial is set to the speed selection dial has been set to the ing compressor, the air conditioning indica- “ ” position, the air conditioning will run “AUTO” position or when the tempera- tor light (A) blinks. Press the air automatically, even if the system is set to ture control dial has been set to the mini- conditioning switch once to turn it off, then “Disable automatic air conditioning control”, mum temperature, the air conditioning once more to turn it back on. If the air condi- in order to prevent windows from fogging switch is automatically controlled. tioning indicator light does not blink there is up. no problem. If it does blink, have it checked Disable automatic air conditioning con- at an authorized Mitsubishi Motors dealer or a repair facility of your choice. trol: Operating the air conditioning The air conditioning switch is not auto- Sometimes, for example after using a high- system (automatic mode) matically controlled, unless the air condi- 7 pressure car wash, the condenser can get wet, N00731700286 and the air conditioning indicator light (A) tioning switch is used. blinks temporarily. Wait for a while, press the air conditioning switch once to turn the Changing the settings system off, then once more to turn it back on. Press the air conditioning switch for about Once the water evaporates, the blinking will 10 seconds or longer. stop. When the setting has changed, the system will beep and the indicator light will flash. Personalizing the air conditioning When the setting has changed from switch (Changing the function set- enabled to disabled, the system will beep three times and the indicator will flash three times. ting) N00759800029 When the setting has changed from dis- abled to enabled, In normal conditions, use the system in the You can change the following functions to AUTO mode and follow these procedures: match your preference. the system will beep two times and the indicator light will flash three times. 1.Set the blower speed selection dial to the NOTE “AUTO” position. The factory setting is “Enable automatic air conditioning control”. 7-26 Comfort controls

owners manual Mitsubishi Lancer

owners manual Mitsubishi Lancer - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer VIII 8 owners manual EN