owners manual Subaru Outback

all ratings: 0 average rating: 5

7-20 Starting and operating NOTE ! Shift lock release ! Shift lock release using the shift The transmission may downshift, de- lock release button If the select lever cannot be operated, turnPerformthefollowingproceduretorelease pending on the way the acceleratortheignitionswitchbacktot“ONhe” pedal is depressed to accelerate theposition then move the select lever to thethe shift lock. vehicle again. “P” position with the select lever button1. Apply the parking brake and stop the pressed and brake pedal depressed.engine. &Shift lock function Ifthe select lever does not move after The shift lock function helps prevent theperforming the above procedure, perform improper operation of the select lever.the following steps. . The select lever cannot be operated. When the select lever cannot be unless the ignition switch is turned to theshifted from “P” to “N”: “ON” position and the brake pedal isRefer to “Shift lock release using the shift depressed. lock release button” F7-20. . Theselect lever cannot be moved from. When the select lever cannot be the “P” position to any other positionshifted from “N” to “R”, “P”: before the brake pedal is depressed. Within 60 seconds after placing the igni- Depress the brake pedal first, and thention switch in the “Acc” position, move the operate the select lever.select lever to the “P” position with the . Only the “P” position allows you to turnselect lever button pressed and brake2. Remove the shift lock cover using a the key from the “Acc” position to thepedal depressed.flat-head screwdriver. “LOCK” position and remove the key from the ignition key cylinder.If you must perform the above procedure, . If the ignition switch is turned to thethe shift lock system (or the vehicle control “LOCK”position while the select lever is insystem) may be malfunctioning. Contact a the “N” position, the select lever may notSUBARUdealerforaninspection assoon bemovedtothe“P”position after a periodas possible. of time. Therefore, move the select leverIfthe select lever does not move after to the “P” position with the brake pedalperforming the above procedure, refer to depressed soon after the ignition switch is“Shift lock release using the shift lock turned to the “LOCK” position.release button” F7-20.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders