owners manual Seat Leon

all ratings: 0 average rating: 5

Emergencies 281 Putting on the spare wheel WARNING When fitting tyres with a compulsory rotation direction, observe ● Make sure that the jack* remains stable. If the surface is slippery or the instructions in ⇒ page 281. soft, the jack* could slip or sink, respectively, with the resultant risk of injury. – Mount the wheel. ● Only raise the vehicle with the jack* supplied by the manufacturer. – Screw on the wheel bolts in position and tighten them loosely Other vehicles could slip, with the consequent risk of injury. with a box spanner. ● Only mount the jack* on the support points designed for this purpose on the strut, and always align the jack correctly. If you do not, the jack* – Carefully lower the vehicle using the jack*. could slip as it does not have an adequate grip on the vehicle: risk of in- jury! – Tighten the wheel bolts in diagonal pairs using the wheel ● The height of the parked vehicle can change as a result of variations brace. in temperature and loading. The wheel bolts should be clean and turn easily. Before fitting the spare wheel, inspect the wheel condition and hub mounting surfaces. These sur- CAUTION faces must be clean before fitting the wheel. The vehicle must not be raised on the crossbar. Only place the jack* on the points designed for this purpose on the strut. Otherwise, the vehicle may be  CAUTION damaged. When removing/fitting the wheel, the rim may hit and damage the brake disc. For this reason, please take care and get a second person to assist  you. Removing and fitting a wheel After loosening the wheel bolts and raising the vehicle with the Tyres with compulsory direction of rotation jack, change the wheel as described below: A directional tread pattern can be identified by arrows on the sidewall that Taking off the wheel point in the direction of rotation. Always observe the direction of rotation in- – Unscrew the wheel bolts using the box spanner and place them dicated when mounting the wheel. This is important so that these tyres can on a clean surface. give maximum grip and avoid excessive noise, tread wear and aquaplaning. – Take off the wheel ⇒  . If, exceptionally, it is necessary to mount the spare wheel* in the opposite direction of rotation, please drive carefully, as in this case the tyre does not have optimum conditions of use. This is particularly important when driving on wet roads.  Safety First Operating instructions Practical Tips Technical specifications

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders