owners manual Seat Exeo

all ratings: 0 average rating: 5

exeo_EN.book Seite 281 Montag, 30. August 2010 4:45 16 If and when 281 – Fit the new bulb, pressing it into the bulb holder and turn it to the Side turn signals right as far as it will go. – Use a cloth to remove any fingerprints from the glass part of the bulb. – Check whether the new bulb is working. – Re-install the bulb holder ⇒ page 281. Position of the bulbs Pos. ⇒page280, Bulb function fig. 222 A Reverse light Fig. 223 Side turn signal Fitting the bulb holder – Press the turn signal to the left or to the right to remove the bulb. The bulb holder is easy to fit. – Remove the bulb holder from the turn signal. – Check that the seal is seated correctly on the bulb holder.– Remove the failed glass bulb and replace with a new bulb. – Position the bulb holder on the tail light and align it so that it is – Insert the bulb holder in the turn signal guide until it clicks into securely seated. place. – Press the bulb holder into the tail light until it engages.– First place the turn signal in the opening in the bodywork, fixing 1 A the tabs ⇒fig.223, arrow . – Fit the cover back in the interior trim so that it engages. 2 – Insert the bulb as shown by the arrow A ⇒ fig. 223. – Put the screwdriver back into the tool kit. – Make sure that all bulbs for the tail lights are working. Safety First Operating Instructions Practical Tips Technical Specifications

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders