or
owners manual Seat Exeo
owners manual Seat Exeo - year of production: 2008, 2009, 2010, 2011, 2012, 2013 - Seat Exeo owners manual EN
Document:
pdf (9.53 MB) 319 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Seat Exeo, year of production 2008 - 2013:
exeo_EN.book Seite 284 Montag, 30. August 2010 4:45 16
284 If and when
Sun visor light – Use a screwdriver to remove the protective cover.
– Remove the bulb, moving it in the direction of the arrow and
outwards ⇒fig.229.
Jump-starting
Jump leads
The jump lead must have a sufficient wire cross section.
If the engine fails to start because of a discharged battery, the battery can be
Fig. 228 Removing sun connected to the battery of another vehicle to start the engine.
visor light
Jump leads
Jump leads must comply with standard DIN 72553 (see manufacturer’s docu-
mentation). The wire cross section must be at least 25 mm2
for petrol engines
2
and at least 35 mm for diesel engines.
Note
• The vehicles must not touch each other, otherwise electricity could flow as
soon as the positive terminals are connected.
• The discharged battery must be properly connected to the vehicle elec-
trical system.
Fig. 229 Removing sun
visor light
– Remove the bulb carefully, using the screwdriver on its flat side
⇒fig.228.
Download PDF
Click here to download a pdf file with an instruction manual for Seat Exeo
year of production from: 2008
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
manual Seat Exeo owners manual
pages 283 - 289
manual Seat Exeo owners manual
page 286 / 319
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF